Whirlpool ET22DK, ET22RK, ET22RM manual Condition, TOO Warm, TOO Cold, Made Fast Enough, Recommended

CONDITION:

If Refrigerator

Section is

TOO WARM

If Freezer

Section is

TOO WARM

If Refrigerator

Section is

TOO COLD

If ICE isn’t

MADE FAST ENOUGH

If BOTH SECTIONS are TOO WARM

Setting the controls

Controls for the refrigerator and freezer are in the refrigerator. To adjust a control, reach under the console and turn the knob. When the refrigerator is plugged in for the first time:

1. Set the Refrigerator Control to 4.

2. Set the Freezer Control to C.

				Give the refrigerator time to cool down
				completely before adding food. (This may take
				several hours.)
				These settings should be about right for normal
				household	refrigerator	usage.
				The controls will be set about right when milk
				or juice is as cold as you like and when ice cream
				is firm.
				Refrigerator Control adjustments range from
				1 to 8. Freezer Control adjustments range from
				A to D.
				Changing	the control	settings
				If you need to adjust temperatures in refrigerator or
				freezer, use the settings listed in the chart below. If
				you have questions, call your COOL-LINE@ serv-
				ice assistance number (see page 14).
				l Adjust the Refrigerator Control first.
				l Wait at least 24 hours between adjustments.
				l Then adjust the Freezer Control if needed.
					RECOMMENDED
REASON:					CONTROL		SETTINGS:
Door	opened		often		Refrigerator		6
Large	amount		of food added		Freezer		D
Room	temoerature			too warm
Door	opened		often		Refrigerator		4
Large	amount		of food added		Freezer		A
Very cold room temperature
(can’t	cycle often			enough)
Controls		not set correctly			Refrigerator		2
for your		conditions			Freezer		A
Heavy	ice usage				Refrigerator		4
Very cold room temperature					Freezer		A
(can’t	cycle often			enouah)
Door opened			often		Refrigerator		6
Large	amount		of food added		Freezer		C
Verywarmor very cold room

temoeratures

5