®
Top Mount Refrigerator
PRODUCT MODEL NUMBERS
G2IXEFMW
G9IXEFMW
Electrical: A
Water: A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).
IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and 827 kPa).
PRODUCT DIMENSIONS
B
A
D
top of
cabinet
E
overall
C
Dimensions “D” and “E” include rollers
extended 3/4" (1.9 cm)
| Depth | Cab. Width | Door Width | Cab. Height | Overall Height |
Model | “A” | “B” | “C” | “D” | “E” |
19 cu.ft. | |||||
| (80 cm) | (74.9 cm) | (76.5 cm) | (166.4 cm) | (168.9 cm) |
|
|
|
|
|
|
22 cu.ft. | |||||
| (80 cm) | (82.6 cm) | (84.1 cm) | (166.4 cm) | (168.9 cm) |
|
|
|
|
|
|
LOCATION REQUIREMENTS
1/2" (1.25 cm) |
2" (5.08 cm) |
To ensure proper ventilation for your refrigerator, allow for a 1⁄2" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on the hinge side (some models require more) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.
NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation | Ref. W10208844 |
Instructions packed with product. Specifications subject to change without notice. |