Whirlpool GS6SHANLB00 manual IceMaker and Storage Bin/Bucket, On some models -Accessory

Page 12

5.With cartridge cap in the vertical position, push the new filter cartridge into the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position. Flush the water system (see “Flushing the Water System after Replacing Filter” later in this section).

Flushing the Water System After Replacing Filter

Use a sturdy container to depress the water dispenser bar until the water begins to flow. Flush the water system by dispensing and discarding 2 to 3 gal. (8 to 12 L) of water. Cleaning the system will take approximately 6 to 7 minutes and will help clear air from the line. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

Using the dispenser without the water filter

You can run the dispenser without a water filter cartridge. Your water will not be filtered.

1.Remove the base grille water filter cartridge. For Style 1, replace the base grille after removing the filter.

2.For Style 2, slide the cartridge cap off the end of the filter cartridge. DO NOT DISCARD THE CAP. With the cartridge cap in the vertical position, insert the cap into the base grille until it stops.

3.Rotate the cartridge cap to a horizontal position. The cartridge cap might not be even with the base grille.

IceMaker and Storage Bin/Bucket

(on some models -Accessory)

To turn the ice maker on/off (Style 1):

The on/off switch for the ice maker is a wire shut-off arm located on the side of the ice maker.

1.To turn the ice maker on, simply lower the wire shut-off arm.

NOTE: Your ice maker has an automatic shut-off. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shut-off arm to the OFF (arm up) position.

2.To manually turn the ice maker off, lift the wire shut-off arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.

MAX

NORMAL

To increase ice production rate:

■Normal Ice Production: In normal ice production mode, the ice maker should produce approximately 7 to 9 batches of ice in a 24-hour period. If ice is not being made fast enough, turn the Freezer Control toward a higher (colder) number in half number steps. (For example, if the control is at 3, move it to between 3 and 4.) Wait 24 hours between each increase.

■Maximum Ice Production (on some models): In maximum ice production, the ice maker should produce approximately 10 to 14 batches of ice in a 24-hour period. If your refrigerator has the maximum ice production feature, push the switch to MAX.

To remove and replace freezer shelf ice bin (Style 1):

1.Pull the covering panel out from the bottom and then slide it back toward the rear.

2.Lift the wire shut-off arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shut-off arm down to the ON position to restart ice production. Make sure the door is closed tightly.

To turn the ice maker on/off (Style 2):

The ON/OFF switch is located on the top right side of the freezer compartment.

1.To turn the ice maker on, slide the control to the ON (left) position.

NOTE: Your ice maker has an automatic shut-off. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

2.To manually turn the ice maker off, slide the control to the OFF (right) position.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Side by Side Refrigerator Use & Care Guide2214241 Table of Contents Refrigerator Safety Before you throw away your old refrigerator or freezerRefrigerator Installation Cleaning before useUnpacking Location RequirementsElectrical Requirements Base GrilleRecommended grounding method To remove the base grilleDoor Removal Base Grille Door AlignmentDoor and Hinge Replacement Door ClosingHandle Removal optional Door RemovalWater Supply Connection Water System PreparationCold water supply Using the Controls Refrigerator USENormal Sounds Ensuring Proper Air CirculationWater and Ice Dispensers Onsome modelsIce dispenser To dispense iceWater Filtration System On some models -Accessory Using the dispenser without the water filterIceMaker and Storage Bin/Bucket Flushing the Water System After Replacing FilterRefrigerator Features Adjustable Flip-up ShelfRefrigerator Shelves Flip-up ShelfConvertible Vegetable/Meat Drawer Temperature Control Deli DrawerCovers Crisper Humidity ControlFreezer Features Cleaning To clean your refrigeratorCan Racks and Door Bins Drop-in Door Rails To remove and replace the railsPower Interruptions Changing theLight BulbsTroubleshooting Vacation and Moving CareIf you choose to turn the refrigerator off before you leave MovingIce maker is not producing ice or not enough ice Ice bucket difficult to remove Accessories U.S.AWater Filter Certifications Performance Data Sheets Substance Reduction Min. Required %Application Guidelines/Water Supply Parameters Whirlpool Corporation will not pay for 2214241

GS6SHANLB00 specifications

The Whirlpool GS6SHANLB00 is a well-engineered side-by-side refrigerator that combines style, functionality, and advanced technology. Designed to meet modern kitchen needs, this model boasts a sleek, stainless steel finish, making it an attractive addition to any home.

One of the standout features of the GS6SHANLB00 is its spacious interior. With a total capacity of over 25 cubic feet, it offers ample room for storing groceries, leftovers, and beverages. The side-by-side configuration allows for easy access to both the refrigerator and freezer sections without sacrificing space.

This refrigerator is equipped with Smart Temperature Control that utilizes advanced sensors to maintain consistent temperatures. This ensures that your food stays fresh longer while enhancing energy efficiency. Additionally, the Adaptive Defrost technology is a significant innovation that saves energy by only running the defrost cycle when necessary, which can lead to lower electricity bills.

The GS6SHANLB00 also features the Accu-Chill Temperature Management System. This system uses a built-in sensor to monitor the internal temperatures and automatically adjust cooling settings based on how often the door is opened and the type of food stored. Users can also enjoy the Convenience Plus Ice and Water Dispenser, located on the front of the refrigerator, which provides filtered water and ice at the push of a button.

Moreover, the interior is designed with adjustable shelves and bins, allowing for customized storage solutions according to the user's needs. The humidity-controlled crisper drawers are perfect for extending the freshness of fruits and vegetables, while the gallon door bins can accommodate larger items such as milk and juice containers.

In terms of energy efficiency, the Whirlpool GS6SHANLB00 is Energy Star rated, meaning that it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This feature not only helps the environment but also provides cost savings for homeowners.

Finally, the audible and visual alarms alert users when the refrigerator door has been left open, or if temperatures rise unexpectedly, ensuring that food safety is always a priority. Overall, the Whirlpool GS6SHANLB00 stands out for its user-friendly features, innovative technologies, and dependable performance. This makes it a popular choice among consumers looking for a reliable refrigerator that harmonizes with their lifestyle.
Top Page Image Contents