Removing the freezer shelf (not on ~~ISEK)
To remove the shelf:
1.Lift front of sheff slightly.
2.Lift back of shelf off supports.
3.Replace in reverse order.
Using the ice cube trays
If cubes are not used, they may shrink. The moving cold air starts a slow evaporation. The longer cubes are stored, the smaller they get.
To remove ice:
1.Hold tray at both ends.
2.Twist slightly.
Using the optional automatic ice maker
If you plan to add an automatic ice maker later (Part No.
l The ON/OFF lever is a wire signal arm. Down . .. to make ice automatically.
up . . . to shut off the ice maker.
. .
NOTE: Do notUrn ice m&r on untrl I&
wnnected to the water supply. lnstructlons for Iy hook .u!, are atI
tithed to the back of the refrwrator cabinet.
lThe dial or lever on the side of the ice maker changes the size of the cubes.
l Shake the bin occasionally to keep cubes separated and to obtain increased storage capacity.
lIt is normal for ice crescents to be attached by a corner. They will break apart easily.
l You will hear water running when ice maker is working. You’ll hear ice fall into the bin. Don’t let these sounds bother you.
l The ice maker will not operate until the freezer is cold enough to make ice. This can take overnight.
l Because of new plumbing connections, the first ice may be discolored or
Raise rignal arm to 6top ice.
Lower rignal
arm to
6t6rt it
12