Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 19.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.
CONDITION: | REASON: |
|
| |
If Refrigerator | Door | opened | often | |
Section is | Large | amount | of food added | |
TOO WARM | Room temperature | too warm | ||
If Freezer | Door | opened | often | |
Section is | Large | amount | of food added | |
TOO WARM | Very | cold room temperature | ||
| (can’t | cycle often | enough) | |
RECOMMENDED CONTROL SETTINGS:
Refrigerator 4
FreezerB
Refrigerator 3
Freezer Between
B and C
If Refrigerator | Controls not | set correctfy | Refrigerator | 2 |
| ||||
Section is | for your | conditions | Freezer | B |
| ||||
TOO COLD |
|
|
|
|
|
|
|
| |
If ICE | isn’t | Heavy | ice | usage | Refrigerator | 3 |
| ||
MADE | FAST | Very | cold | room temperature | Freezer | Between | |||
ENOUGH | (can’t | cycle | often enough) |
| B and | C | |||
If BOTH | Door | opened | often | Refrigerator | 4 |
| |||
SECTIONS | Large | amount of food added | Freezer | Between | |||||
are TOO WARM | Very | warm | or very cold room |
| B and | C | |||
temperatures
Adjusting the refrigerator shelves
Shefves can be adjusted to match the way you use your refrigerator.
To remove glass shelves:
1.Remove items from shelf.
2.Tilt shelf up at front.
3.Lift back of shelf.
4.Pull shelf straight out.
To replace glass shelves:
1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.
2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.