Whirlpool GS6NHAXV Temperature and Moisture, Iceand Water, Temperature is too warm

Page 12

The lights do not work

■Is a light bulb loose in the socket or burned out? See “Changing the Light Bulbs.”

■Is the dispenser light set to OFF? The dispenser light will operate only when the levers are pressed. If you want the dispenser light to stay on continuously, set the dispenser light to ON, or NIGHT LIGHT or AUTO or HALF or DIM. See “Water and Ice Dispensers.”

■Is the dispenser light set to NIGHT LIGHT or AUTO? If the dispenser is set to the NIGHT LIGHT or AUTO mode, be sure the dispenser light sensor is not blocked. See “Water and Ice Dispensers.”

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Iceand Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements” in either the Installation Instruction booklet or the Use and Care Guide.

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Refrigerator Safety Refrigerator User InstructionsInstallation Instructions Unpack the RefrigeratorBefore You Throw Away Your Old Refrigerator or Freezer LocationRequirements Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect Water Supply Reverse Osmosis Water SupplyStyle Using theControls Temperature Control Adjustment and Cooling On/OffRefrigerator USE Adjusting the Controls Condition Temperature AdjustmentAdditional Features Fast Cool & Fast Ice Refrigerator ControlsConvertibleDrawer Temperature Control Crisper Humidity ControlChilled Door Bin Water and Ice DispensersTo Dispense Water Standard To Dispense Water Measured FillIce Maker and Storage Bin To Dispense IceCleaning To Clean Your RefrigeratorRefrigerator Care Water Filtration SystemTroubleshooting Refrigerator OperationMotor seems to run too much Refrigerator is noisyTemperature and Moisture Temperature is too warmIceand Water Accessories Stainless Steel Cleaner and PolishWater dispenser will not operate properly Recently dispensed large amount of water? Allow 24 hoursPerformance Data Sheets Application Guidelines/Water Supply ParametersBase Grille Water Filtration System Limited Warranty Items Excluded from WarrantyThis limited warranty does not cover Disclaimer of Implied Warranties Limitation of RemediesSeguridad DEL Refrigerador EL Usuario DEL RefrigeradorInstrucciones DE Instalación Desempaque el refrigeradorRequisitos de ubicación Antes de tirar su viejo refrigerador o congeladorRequisitos eléctricos Requisitos del suministro de aguaMétodo de conexión a tierra recomendado Suministro de agua de ósmosis inversaConexión del suministro de agua EstiloConexión a la línea de agua Conexión al refrigeradorUso de los controles Cómo terminar la instalaciónCondición Regulación DE LA Temperatura Depósito enfriador de la puerta Despachadores de agua y hieloPara despachar agua estándar Para despachar agua Llenado medidoFábrica dehielo y depósito Para despachar hieloRecuerde Sistema de filtración de agua LimpiezaPara limpiar su refrigerador Solución DE Problemas Cómo cambiar los focosFuncionamiento delrefrigerador Temperatura y humedad Hielo y aguaEs difícil abrir las puertas Accesorios El despachador de hielo no funciona debidamenteLimpiador de acero inoxidable Cartucho del filtro de la base estándarHoja DE Datos DEL Rendimiento Pautas de aplicación / Parámetros para el Suministro de aguaInfluente Agua a tratar Efluente Reducción Efectos estéticos Whirlpool Corporation Garantía LimitadaExclusiones DE LA Garantía Esta garantía limitada no cubreSécurité DU Réfrigérateur RéfrigérateurInstructions Dinstallation Exigences demplacementDéballagedu réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurMéthode recommandée de mise à la terre SpécificationsélectriquesSpécifications del’alimentationen eau Alimentation en eau par osmose inverseRaccordement de la canalisation deau Raccordement à une canalisation d’eauRaccordement au réfrigérateur Utilisation des commandes Achever l’installationUtilisation DU Réfrigérateur Condition Ajustement DE LA Température Commande de température dans Le tiroir convertible Compartiment fraîcheur dans la porteDistributeurs d’eauet de glaçons Distribution deau standard Distribution deau remplissage mesuréLe distributeur deau Unités Par défaut Minimum MaximumMachineà glaçons et bac dentreposage Distribution de glaceEntretien DU Réfrigérateur Système de filtrationde leauNettoyage Nettoyage de votre réfrigérateurRemplacement des ampoules d’éclairage DépannageFonctionnement du réfrigérateur Température et humidité Glaçons et eauAccessoires Nettoyant et poli pour acier inoxydableCartouche du filtre de la base standard Feuilles DE Données SUR LA Performance Système de filtration deau de la grille de la baseSystème de filtration deau de la grille de la base Garantie DES Gros Appareils Ménagers Whirlpool Corporation Garantie LimitéeArticles Exclus DE LA Garantie La présente garantie limitée ne couvre pas

GS6NHAXV specifications

The Whirlpool GS6NHAXV is a cutting-edge refrigerator that embodies both style and functionality, making it a popular choice for modern kitchens. As part of Whirlpool’s renowned lineup, this model offers a variety of features designed to enhance food storage and organization while maintaining energy efficiency.

One of the standout features of the GS6NHAXV is its spacious interior, with a total capacity of approximately 25 cubic feet. This generous space is divided into multiple compartments, including adjustable shelves and humidity-controlled crisper drawers that help keep fruits and vegetables fresh for longer. The Flexi-Slide bin provides added convenience, allowing users to create more space for taller items or smaller items in need of a specific storage area.

Temperature management is another highlight of this Whirlpool refrigerator. The Accu-Chill Temperature Management System utilizes advanced sensors to monitor internal temperatures and maintain optimal conditions for food preservation. This ensures that every corner of the fridge reaches the ideal temperature without excessive energy consumption. The ENERGY STAR certification on the GS6NHAXV signifies its commitment to energy efficiency, helping families save on utility bills while reducing their environmental footprint.

For additional convenience, the GS6NHAXV features an exterior ice and water dispenser. The in-door ice system not only saves space inside the freezer but also offers a filtered water source, ensuring that you have access to clean drinking water at all times. The dispenser also includes options for crushed or cubed ice, catering to a variety of preferences for beverage preparation.

Moreover, the Whirlpool GS6NHAXV is designed with user-friendly technology in mind. The digital display allows users to easily adjust settings, monitor energy usage, and even activate the Sabbath mode. This level of controllability makes it simpler than ever to customize the refrigerator to fit your lifestyle.

On the exterior, the sleek stainless steel finish adds a modern aesthetic that can enhance any kitchen décor. Fingerprint-resistant technology helps maintain its pristine look by combating smudges and stains, making cleaning a breeze.

In conclusion, the Whirlpool GS6NHAXV refrigerator excels in delivering a balanced mix of storage capacity, energy efficiency, and advanced features. Its thoughtful design and user-friendly technologies make it a top choice for individuals and families looking to invest in a reliable and stylish appliance for their homes.
Top Page Image Contents