QSC Audio PLX 1104, PLX 3102, PLX 1802 Cooling, AC Mains Connection, AC Mains Current Draw

Page 5

Cooling

Air flows from the rack, into the back of the amplifier, and out the front. This keeps the rack cool. The fan automatically runs faster when the amp is working hard.

Do not block the front or rear air vents!

AC Mains Connection

Connect AC power to the IEC socket on the back of the amplifier. NOTE: Turn off the AC power switch before connecting AC power. Connect the AC mains plug to a suitable AC mains outlet.

The correct AC line voltage is shown on the serial number label, on the rear panel. Connecting to the wrong line voltage may damage the amplifier or increase the risk of electric shock.

The rear chassis ear can be used to retain the IEC power connector. After inserting the IEC block into the recepta- cle, use a wire-tie or similar device to secure the cord to the chassis ear.

Air flow in QSC amplifiers: Cool air is drawn into the rear of the amplifier by the cooling fan. Warm air exits the front of the amplifier.

Orient the IEC connector with the connector prongs in the socket, then push the connector firmly into the IEC socket until fully seated.

AC Mains Current Draw

The table at the right provides typical current draw for each model as a function of load and output power level. Units of measurement are amperes rms.

NOTE! Current draw shown is for 120 VAC line. For 230 VAC models, multiply values shown by 0.5.

•1/8 power (pink noise) represents typical program with occa- sional clipping. Use this rating for most applications.

•1/3 power (pink noise) represents severe program with heavy clipping.

•Full power (sine) is continuous sine wave driven at 1% clipping. •PLX 1802, PLX 2502, PLX 3102, and PLX 3602 models: Thermal

or overcurrent cutback limits duration of full power 2 ohm operation. Long term, active limiting to 30A at 120V.

•PLX 1104 and PLX 1804 models: Long-term, circuit breaker lim- ited to 15A at 120V.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PLX PLX Series Professional Audio AmplifiersFCC Interference Statement Important Safety Precautions & Explanation of SymbolsFront Panel IntroductionUnpacking Rack Mounting Rear PanelAC Mains Current Draw CoolingAC Mains Connection Low Frequency Filters PLX 1802/2502/3102/3602 models only Clip Limiters PLX 1802/2502/3102/3602 models onlyXLR TRS InputsOutputs Speakon Output ConnectorsPower PWR Blue LED IndicatorsSignal SIG, -10 Green Clip REDGain Controls Power SwitchPLX 1802/2502/3102/3602 models Protection SystemsSpecifications PLX 1104, PLX Input Specifications PLX 1802, PLX 2502, PLX 3102, PLXAppendix a Speakon Wiring Reference Page Mailing address
Related manuals
Manual 16 pages 32.62 Kb

PLX 3602, PLX 2502, PLX 1802, PLX 1804, PLX 3102 specifications

The QSC Audio PLX 1104 is a versatile and powerful power amplifier designed to meet the demands of live sound applications, installations, and more. Renowned for its exceptional performance and reliable operation, the PLX 1104 has become a preferred choice for sound engineers and audio professionals alike.

One of the standout features of the PLX 1104 is its lightweight design. Weighing in at just 10.5 pounds, this amplifier is easy to transport and install, making it ideal for mobile applications. Its compact form factor allows for efficient use of space in equipment racks and allows for quick setups and takedowns during events.

The QSC PLX 1104 outputs an impressive 1,000 watts per channel at 8 ohms and 1,200 watts at 4 ohms, providing ample power for driving a wide range of loudspeakers. This capability makes it suitable for various applications, from small clubs to larger venues requiring robust sound reinforcement. The amplification system utilizes a high-efficiency design that significantly reduces power consumption and heat generation, enhancing reliability and longevity.

In terms of connectivity, the PLX 1104 features balanced XLR inputs and Neutrik Speakon outputs, ensuring compatibility with a broad array of sound systems. Its intuitive control layout, including a rear-mounted gain control for each channel, allows for easy dial-in of the desired output level.

The PLX 1104 employs QSC's advanced proprietary technology to deliver exceptional audio quality. This includes sophisticated output transistors and a high-frequency protection circuit, ensuring that the amplifier provides clean and undistorted sound, even at high output levels. Furthermore, the built-in thermal management system helps to prevent overheating, further increasing the reliability of the amplifier in demanding environments.

Additional features of the PLX 1104 include a switchable low-frequency filter that can help to improve the overall clarity of sound, particularly in live sound scenarios where low-end muddying can occur. The amplifier is also equipped with a front-panel LED status indicator that serves as a visual cue for the operational status of the unit.

In summary, the QSC Audio PLX 1104 is a testament to modern amplifier technology, combining lightweight portability with powerful performance and rich features. Its ability to deliver high-quality audio while being exceptionally user-friendly makes it a go-to solution for audio professionals who require both reliability and flexibility in diverse sound reinforcement situations.
Top Page Image Contents