Whirlpool ETl4EK manual Changing the light bulb, Moving the meat pan and cover

Changing the light bulb.. .

WARNING: Before removing the light bulb, either unplug the refrigerator or disconnect

the electricity leading to the re- frigemtor at the main power supply. Shock and injury could occur.

1 Reach behind control console to find bulb

2 Remove bulb

3 Replace with a do-watt appliance bulb

Moving the meat pan and cover...

The meat pan and cover can be removed for cleanrng and moved to another shelf, If destred Remove the meat pan first

Adjusting the refrigerator shelves...

1 First, remove food from shelf
2	Slrde shelf straight	out to	stop	Guide	Stop
3	Lift front
4	Slide the rest of the	way	out	Shelf	Stop

Replacing Shelf:

1.Fit back of shelf on top of guides with wire stops on the bottom of guides.

2.Lift front, slrde shelf in untrl it clears guide stops

Removing:

1.Slide meat pan out to stop.

2.Lift the front of meat pan.

3.Slide pan the rest of the way out.

4.To remove cover, lift it straight up and out Replacing:

1.To replace cover, fit notches in cover sides over

center shelf support

2.Lower cover in place.

3.To replace pan, fit edges of pan into supports on cover.

4 Slide meat pan into place.

Removing crispers and crisper cover.. .

Then the Back.

Pull out to stop. ift the Front and Pull Again.

Removing Crispers:

I. Slide crisper stratght out to stop

2.Lift the front.

3.Slide the rest of the way out

4.Replace In reverse order

Remove Cover:

1Lift front, then lift back

2 Pull up and out

Replacing Cover:

1.Fit notches on back of cover into back nubs on wall of refrrgerator.

2.Lower front into place.

Removing the freezer shelf.. .

1Lrft front slrghtly

2Lift back off supports

3 Replace in reverse order

Lift the Front

Then the Back

6