Whirlpool ET20NK, ET20NM Vacation and moving, Care, Long vacations, Short vacations, Moving

Page 15

PART

Defrost pan

Condenser coils

Floor under refrigerator

WHAT TO USE

Sponge or cloth with mild detergent and warm water

Vacuum cleaner with extended narrow attachment

Floor cleaners

HOW TO CLEAN

l Remove base grille. (See page 12.)

l To remove defrost pan, lift pan over wire brace (remove tape; il any).

l Wash, rinse and dry thoroughly.

l Replace with notched corner to the rear. Push it in all the way.

l Make sure defrost pan drain tube is pointing into pan.

. Replace base grille.

l Remove base grille.

l Vacuum coils when dusty or dirty. Coils may need to be cleaned as often as every other month.

l Replace base grille.

lRoll refrigerator out only as far as the water supply line allows.

l Clean floor.

. Roll refrigerator back into place.

l Checkto see if the refrigerator is level.

Vacation and moving

Long vacations

Remove all the food if you are going for a month or more. If your refrigerator is equipped with an automatic ice maker, turn off the water supply to the ice maker at least one day ahead. When the last load of ice drops, turn off the ice maker. Make sure all ice is dispensed out of mechanism.

Unplug the refrigerator. Clean it, rinse well and dry. Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This will keep odor and mold from building up.

Personal Injury Hazard

Do not allow children to climb on, play near or climb inside the refrigerator when the doors are blocked open.

They may become injured or trapped.

To restart refrigerator, see “Using Your Refrigera- tor” on page 7.

care

Short vacations

No need to shut off the refrigerator if you will be away for less than four weeks. Use up perish- ables; freeze other items. If you have an automatic ice maker:

1.Turn off your ice maker by raising signal arm.

2.Shut off the water supply to the ice maker.

3.Empty the ice bin.

Moving

If your refrigerator is equipped with an auto- matic ice maker, shut off the ice maker water supply at least a day ahead. Disconnect the water line. After the last load of ice drops, lift the signal arm to turn off the ice maker.

Remove all food. Pack frozen food in dry ice. Unplug the refrigerator and clean it thoroughly.

Take oul all removable parts. Wrap all parts well and tape them together so they don’t shift and rattle. Screw in the leveling legs; tape the doors shut; and tape the electric cord to the cabinet.

When you get to your new home, put every- thing back and refer to page 5. Also, if you have an automatic ice maker, remember to reconnect the water supply line.

15

Image 15
Contents Models ET20NK ET18NK ET20NM ET18NM Thank you for buying a Whirlpool appliance Your safety is important to usHelp us help you Important Safety InstructionsControl panel Parts And FeaturesPlugging it Before Using Your RefrigeratorCleaning it Installing it properlyR0lkU Leveling itThis Using Your RefrigeratorSetting the controls Temperature controlsChanging the control SettingsRemoving the crispers Adjusting the refrigerator shelvesRemoving the meat drawer CoverEtzonk and Etzonm Using the ice cube traysRemoving the crisper ET18NK and ET18NMEtzonm Using the automatic ice makerRemoving the base gril le Changing the light bulbsReversing the door swing Understanding the sounds you may hearSaving energy Cleaning your refrigerator Caring For Your RefrigeratorThis Section PawPaw Short vacations Vacation and movingCare Long vacationsPower interruptions Food Storage GuideStoring fresh food Storing frozen food Before calling for assistance ProblemSolution If You Need AssistanceIf you need FSP@ replace- ment parts If you need serviceIf you are not satisfied with how the problem was solved If you need assistanceWhirlpool will not PAY for Whirlpool will PAY for Refrigerator WarrantyLength of Warranty Full FIVE-YEAR Warranty