QSC Audio manual Basis 922uz, QSControl.net Digital System, Features, Fixed Latency DSP

BASIS 922uz

QSControl.net™ Digital System

QSControl.net, QSC’s next generation network audio system, achieves the seamless integration of the company’s signal transport, control, processing, and monitoring technologies. QSControl.net brings together QSC’s digital, power amplification and loudspeaker products into a unified system that enables the user to administrate it all via a fully integrated graphical user interface. The new generation BASIS™ devices are designed to operate under the company’s QSControl.net platform.

BASIS 922uz

The BASIS platform meets the control, monitoring, signal transport and processing needs of amplification and loudspeaker systems over an Ethernet network. The BASIS 922uz units combine three distinct QSC technologies within a single hardware unit. Amplifier and loudspeaker control, monitoring and protection, configurable DSP, and CobraNet™ audio transport are seamlessly integrated into one powerful single RU package.

Through QSControl.net, QSC’s BASIS and next-generation RAVE and DSP products can be networked together and controlled from a single software interface. In addition, multiple networked computers can be set up to control and monitor all of the units simultaneously.

Fixed Latency DSP

Users of most other configurable DSP systems are familiar with a variable latency inherent in the processing configuration. Add more processing blocks and you also add delay, whether you want it or not. QSC’s DSP engine is unique in having a short and fixed processing latency through the DSP subsystem. When the A/D and D/A converters are included, the total analog-to-analog latency of a single unit is a negligible 2.354 milliseconds. QSC’s fixed latency DSP is configurable DSP that stays fast and predictable from one configuration to the next.

For more information, visit www.qscontrol.net

QSC, the QSC logo, QSContol.net and BASIS are registered trademarks of QSC Audio Products, LLC in the U.S. Patent and Trademark office and other countries. THX is a trademark of THX Ltd. CobraNet is a trademark of Cirrus Logic, Inc. All other trademarks are the property of their respective owners. Patents may apply or be pending.

Inputs		DSP	Outputs
Analog	CobraNet		DataPort	CobraNet
8 universal mic/line	16 of 32	24 x 24	4(8 channels)	32

Features

•Universal inputs - mic/line with pre-amps and phantom power

•Amplifier and loudspeaker control, monitoring and protection

•Configurable DSP functions and signal paths

•Fixed latency DSP engine

•Ethernet controllable

•CobraNet audio transport with new intuitive GUI

•Two Ethernet ports – CobraNet and control can be run over a single cable or be divided between the two ports. The CobraNet port is 100Base-T. The control port is 10Base-T

•Each unit can store eight design configurations that can be changed on the fly

•Snapshots can recall config or block and/or parameter settings

•THX™ approved for professional cinema applications

DSP functions include, but are not limited to:

•Matrix mixer – any size, up to 24 x 24

•Automixers – gain sharing

•Routers – any size, up to 24 x 24

•Gain controls – any channel count, up to 24

•Graphic equalizers

•Filters – high-pass, low-pass, all-pass, shelf, parametric, parametric shelf, Butterworth high and low-pass, Linkwitz-Riley high and low-pass, Bessel-Thomson high and low-pass

•Crossovers – Linkwitz-Riley, Butterworth, Bessel-Thomson in-phase, Bessel- Thomson symmetrical, 2-way, 3-way, and 4-way general purpose adjustable

•Compressors, peak limiters, AGC’s, gates, dynamics processor

•Duckers – up to 8 channels, up to 60 seconds fade in and fade out times, priority mix

•Pink noise, white noise, sine generators

•Delays

•Macros – user-definable custom blocks with password protection