Whirlpool W10475403A Reverse Doors optional, Cabinet, Replace Doors and Hinges, Final Steps

Page 6

4.Remove the parts for the center hinge as shown in the Center Hinge graphic.

NOTE: Provide support between the refrigerator door and the floor while the hinges are being moved. Do not depend on the door magnets to hold the door in place while you are working.

5.Lift the refrigerator door free from the cabinet.

6.Remove the four screws (two on the bottom and two on the front) attaching the Bottom hinge to the cabinet. See Bottom Hinge graphic.

Reverse Doors (optional)

IMPORTANT: If you want to reverse your doors so that they open in the opposite direction, follow these steps. If you are not reversing the doors, see “Replace Doors and Hinges.”

Graphics follow these instructions.

Door Hinge

Cabinet Hinge

Hole Plug

Hole Plug

Cabinet

1.From the top of the cabinet, remove the hinge hole plugs, move them to the opposite side, and insert the hole plugs into the holes from where you removed the hinge screws. See Graphic 1-2.

2.Remove the screws filling the holes to be used for the Center Hinge and install them on the opposite side.

3.Move the leveler from the bottom of the refrigerator and install it on the opposite side.

4.Move the parts of the top hinge, center hinge and bottom hinge to the opposite side.

Doors

1.Remove door hinge hole plug from top of freezer door. Move to opposite side as shown. See Graphic 2.

2.Remove the door stop from the bottoms of both the freezer and refrigerator doors and install them on the opposite side. See graphics 3 and 4.

Replace Doors and Hinges

NOTES:

■Graphic may be reversed if door swing is reversed.

■Provide additional support for the doors while the hinges are being reinstalled. Do not depend on the door magnets to hold the doors in place while you are working.

1.Replace the parts for the bottom hinge as shown. Tighten screws. Replace the refrigerator door.

2.Assemble the parts for the center hinge as shown and tighten all screws. See Center Hinge graphic. Replace the freezer door.

3.Assemble the parts for the top hinge as shown. See Top Hinge graphic. Do not tighten screws completely.

4.Align the doors so that the bottom of the freezer door is even with the top of the refrigerator door. Tighten all screws.

Final Steps

1.Check all holes to make sure that hole plugs and screws are in place.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

2.Plug into a grounded 3 prong outlet.

3.Reset the controls. See “Using the Control(s).”

4.Return all removable door parts to doors and food to refrigerator.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation Instructions TOP Mount Refrigerator Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerUnpack the Refrigerator Installation InstructionsClean Before Using Location RequirementsConnect the Water Supply Electrical RequirementsWater Supply Requirements Recommended Grounding MethodConnect to Refrigerator Refrigerator DoorsStyle Remove Doors and HingesDoors Reverse Doors optionalCabinet Replace Doors and HingesDoor Swing Reversal optional Refrigerator Shelves Refrigerator FeaturesAdjust the Doors Meat DrawerUtility or Egg Bin Freezer FeaturesCrisper Freezer ShelfCan Racks and Door Bins Door FeaturesDoor Rails or Trivets Vacation and Moving CareProblem Solver Whirlpool. All rights reserved

W10475403A specifications

The Whirlpool W10475403A is a sophisticated microwave oven that combines modern technology with user-friendly features, designed to enhance culinary experiences in the kitchen. This appliance stands out not only for its sleek design but also for its impressive functionality that caters to various cooking needs.

One of the key features of the W10475403A is its unique sensor cooking technology. This innovative feature adjusts cooking times and power levels automatically based on the moisture released during cooking. By detecting when food is cooked to perfection, it ensures optimal results, preventing overcooking or undercooking, which is a common challenge with conventional microwaves.

The oven boasts multiple cooking presets that simplify meal preparation. These presets allow users to quickly reheat leftovers, defrost frozen foods, and even cook specific dishes with just a touch of a button. This programming capability saves time and provides convenience, making it an ideal choice for busy households.

In terms of capacity, the W10475403A offers ample interior space, allowing users to accommodate a variety of dishes, from large casseroles to popcorn bags. The turntable enhances even cooking by rotating food for consistent heat distribution, ensuring a thorough cooking process.

Cleaning is made easier with the appliance's stainless steel interior, which is not only stylish but also simplifies the wipe-down process. The design minimizes stains and food residue, promoting hygiene in the kitchen.

Noise reduction technology is an additional enhancement that sets this microwave apart. It operates more quietly than traditional models, creating a more pleasant cooking environment without disruptive sounds.

Moreover, the Whirlpool W10475403A is equipped with a child lock feature to ensure safety in homes with young children. This function restricts access to the microwave, preventing accidental operation and ensuring peace of mind for parents.

In summary, the Whirlpool W10475403A is a versatile microwave that includes advanced sensor cooking technology, user-friendly presets, a spacious interior, and easy cleaning features. Its combination of modern conveniences and safety measures makes it an excellent addition to any kitchen, catering to both novice and experienced cooks alike.
Top Page Image Contents