Whirlpool W10208840A, W10208839A Accessories, Temperature and Moisture, Ice and Water

Page 11

The door is difficult to open

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

■Gaskets dirty or sticky? Clean gaskets and contact surfaces with mild soap and warm water. Rinse and dry with soft cloth.

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep door fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Control(s) set correctly for the surrounding conditions? Adjust the control(s) a setting colder. Check temperature in 24 hours. See “Using the Control(s).”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep door fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

ACCESSORIES

To order stainless steel cleaner, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

In Canada, Order Part #31462B

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method LocationRequirementsElectrical Requirements Reverse Osmosis Water Supply Water Supply RequirementsConnect the Water Supply Water PressureRemove Doors and Hinges all models Complete the InstallationRefrigerator Doors Connect to RefrigeratorFinal Steps all models Reverse Doors-Contour Door optionalReplace Doors and Hinges all models Optional Refrigerator USE Adjust the DoorsUsing theControls Ice Maker CleaningRefrigerator Care Crisper Humidity ControlRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water AccessoriesTemperature and Moisture Disclaimer of Implied Warranties Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurRetirer les matériaux d’emballage Instructions DinstallationExigences demplacement Déballagedu réfrigérateurPression de leau Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications del’alimentationen eauRaccordement au réfrigérateur Achever l’installationRaccordement de la canalisation deau Raccordement à une canalisation d’eauPorte du compartiment de congélation Portes du réfrigérateurDémontage Portes et charnières tous les modèles CaissePortes Réinstallation Portes et charnières tous les modèlesÉtapes finales tous les modèles Facultatif Ajustement desportes Utilisation des commandesUtilisation DU Réfrigérateur Nettoyage Entretien DU RéfrigérateurMachine à glaçons Fonctionnement duréfrigérateur Remplacement des ampoules d’éclairageDépannage Glaçons et eau AccessoiresTempérature et humidité La présente garantie limitée ne couvre pas CorporationGarantie Limitée Éléments Exclus DE LA Garantie

W10208840A, W10208839A specifications

The Whirlpool W10208839A and W10208840A are advanced refrigerator water filters designed to enhance the quality and taste of drinking water while providing reliable filtration for ice and water dispensers. These filters are engineered with innovative technologies that ensure consumers have access to clean and safe water, making them essential components for any modern refrigerator.

One of the standout features of the W10208839A and W10208840A filters is their ability to reduce a wide range of contaminants. They are designed to remove chlorine taste and odor, sediment, and various harmful substances, including lead and mercury. This comprehensive filtration process helps to enhance the overall quality of the water dispensed through your refrigerator, making it safer for you and your family.

The filters utilize advanced carbon block technology, which is known for its high adsorption capacity. This method allows the filters to effectively trap impurities while allowing essential minerals to pass through, ensuring that the water retains its natural taste. Furthermore, these filters provide a flow rate of approximately 0.5 gallons per minute, ensuring that ice and water are dispensed quickly and efficiently.

Installation and maintenance of the W10208839A and W10208840A filters have been designed to be user-friendly. They feature a simple twist-and-lock mechanism that allows homeowners to replace filters with minimal effort. Whirlpool recommends changing the filter every six months or after filtering approximately 200 gallons of water, whichever comes first. Regular replacement ensures optimal performance and contaminant reduction.

Another important characteristic of these filters is their compatibility with various Whirlpool refrigerator models. This versatility makes them a convenient choice for many households looking to maintain their appliances without sacrificing water quality.

In summary, the Whirlpool W10208839A and W10208840A filters stand out for their effective contaminant reduction, advanced carbon block technology, easy installation, and wide compatibility with various models. They are vital components for anyone seeking to improve the water quality from their refrigerator, offering peace of mind knowing that their drinking water is clean and refreshing. Whether for everyday hydration or filling up a glass for guests, these filters ensure that the water you consume meets high standards of safety and taste.
Top Page Image Contents