QSC Audio PB2082-I, WL2082-I, WL115-SW, FB2082-I, GS115-SW Attaching WL2082-i to Array Frame

Page 7

Rigging the Installation Line Array (continued)

Table 1: ILA Working Load Limits

Component

Weight

5:1 Design Factor

7:1 Design Factor

10:1 Design Factor

 

 

 

 

 

 

 

 

 

 

EB2082-i Extension Bar

38 lb (17.3 kg)

2400 lb(1090.0 kg)

1714 lb (779.2 kg)

1200 lb (545.5 kg)

 

 

 

 

 

FB2082-i Array Frame

17 lb (7.7 kg)

1036 lb (470.9 kg)

740 lb (336.4 kg)

518 lb (235.5 kg)

 

 

 

 

 

PB2082-i Pull Back Bar

6 lb (2.7 kg)

296 lb (134.5 kg)

211 lb (96.1 kg)

148 lb (67.3 kg)

 

 

 

 

 

WL2082-i Loudspeaker

37 lb (16.8 kg)

889 lb (403.2 kg)

634 lb (288.3 kg)

445 lb (201.8 kg)

 

 

 

 

 

WL115-sw Loudspeaker

111 lb (50.5 kg)

1036 lb (470.9 kg)

740 lb (336.4 kg)

518 lb (235.5 kg)

 

 

 

 

 

M8 Shoulder Bolt1

not applicable

1404 lb (638.2 kg)

1003 lb (455.8 kg)

702 lb (319.1 kg)

M8 Ball-lock Pin1

not applicable

2534 lb (1151.8 kg)

1810 lb (822.7 kg)

1267 lb (575.9 kg)

M12 Shoulder Bolt1

not applicable

6641 lb (3018.8 kg)

4744 lb (2156.3 kg)

3321 lb (1509.4 kg)

3/8” Fastener1

not applicable

2721 lb (1236.7 kg)

1943 lb (883.4 kg)

1360 lb (618.4 kg)

7/8” Fastener1

not applicable

11354 lb (5161.0 kg)

8110 lb (3686.4 kg)

5677 lb (2580.5 kg)

1- Working Load Limits are per fastener loaded in double shear. Data is for informational purposes only.

Attaching WL2082-i to Array Frame

Before beginning any installation, have your system designer configure the array with proper splay angles using QSC’s EASE Focus (Array Calculator). All orientation of product is to be as

viewed from the rear of the enclosure.

Figure 7: WL2082-i attached to FB2082-i

 

Attach the array frame to the suspension structure using a 3/4” (20 mm) screw pin anchor

 

shackle and appropriate sling, cable, etc....

 

For arrays of 4 WL2082-i or less, assemble the cluster of WL2082-i on the ground using the

 

included mating hardware. Ensure the notched rigging plate is on the right hand side (the sys-

 

tem can only be installed one way. Note the QSC logo on the input plate will be right side up

 

when the enclosure is oriented properly). During assembly, ensure your splay angles are as

 

desired.

 

When constructing large arrays it is recommended to first assemble units of four enclosures

 

and then assemble the final array by joining the four enclosure units to one another.

 

Attachment of one enclosure to another is accomplished by inserting the cap-head shoulder

 

bolt with washer through the rigging plate attachment holes and appropriate splay angle

 

selection holes in the mating rigging plates and threading the lock nut (nylock) on the inside

 

edge of the plates. The bolt should be tightened snuggly to no more than 5 lb-ft of torque (6.8

 

N-m). See Figure 7 for assembly detail.

 

Attach the array frame to the top enclosure by inserting the cap-head shoulder bolt with

 

washer through the appropriate mounting holes and threading the lock nut (nylock) on the

 

inside edge of the plates. The bolt should be tightened snuggly to no more than 5 lb-ft (6.8 N-m)

 

of torque.

 

NOTE: For some array configurations, use of the extension bar and/or pull-back

 

may be required to achieve the required aiming angle.

 

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TD-000218-00 QSC Audio Products 3 Year Limited Warranty Important Safety PrecautionsWL2082-i IntroductionRigging WL115-swUse only shackle hole for suspension of array ILA Working Load Limits and Design Factors Rigging the Installation Line ArrayRules for Suspension Shock LoadingAttaching WL2082-i to Array Frame Mm shackle and appropriate sling, cable, etc Pull-Back BarExtension Bar Attaching the WL115-sw to the Array FrameAttaching WL2082-i enclosures beneath WL115-sw enclosures Attaching the GS115-sw Ground Stack Rails to a WL115-swCenter of the pull back bar for lifting Attaching WL115-sw behind WL2082-i array using EB2082-iAssembly detail Enclosure is oriented properlyInput Connections Mode Selection SwitchBI AMP Mode Horizontal Shading Selection Switch WL2082-i Controls and ConnectionsWL115-sw Connections WL115-sw Input Plate WL115-sw Connector Pinout PINConnectionHz -10 dB HF 126/132 dB WL2082-i SpecificationsFrequency Response Frequency Range High Frequency Low FrequencyWL115-sw Specifications FB2082-i Specifications EB2082-i Specifications38 lb 17.3 kg GS115-sw Specifications PB2082-i SpecificationsPage Page Page Telephone Numbers How to Contact QSC Audio Products
Related manuals
Manual 20 pages 30.51 Kb

EB2082-I, GS115-SW, FB2082-I, WL115-SW, PB2082-I specifications

QSC Audio is renowned for its high-performance audio solutions, and the FB2082-I, PB2082-I, EB2082-I, WL115-SW, and GS115-SW models showcase this commitment to excellence. Each of these products offers unique features and characteristics, making them ideal for various professional audio applications.

The FB2082-I is a full-range loudspeaker designed for permanent installation in venues such as theaters, auditoriums, and houses of worship. It features a dual 8-inch low-frequency driver and a 1-inch compression driver, providing robust sound reproduction with exceptional clarity. Its weather-resistant enclosure allows for outdoor use, making it a versatile choice for any setting. Integrated mounting points simplify installation while ensuring optimal performance.

The PB2082-I takes versatility a step further, offering a similar dual-8 configuration but with the added benefit of pole-mounting capability. This feature makes it suitable for mobile applications such as concerts or corporate events. The robust design and high-frequency response make the PB2082-I an outstanding choice for those needing flexibility without compromising quality.

For outdoor environments, the EB2082-I stands out with its enhanced weatherproofing. This model is specifically engineered to withstand harsh conditions while delivering high-quality audio. Its passive crossover network optimizes frequency distribution, ensuring that sound remains consistent, even over long distances.

The WL115-SW subwoofer completes the setup, delivering powerful low-end frequencies with its 15-inch driver. Ideal for both touring and fixed installations, it offers exceptional sound pressure levels and deep bass response. The included integrated rigging hardware allows for efficient deployment in various configurations.

Finally, the GS115-SW is designed for installed applications where space is at a premium. This compact yet powerful subwoofer also features a 15-inch driver but is optimized for tight spaces without sacrificing performance. The GS115-SW is perfect for smaller venues or rooms that demand a full-bodied sound while maintaining aesthetic appeal.

In summary, the QSC Audio FB2082-I, PB2082-I, EB2082-I, WL115-SW, and GS115-SW represent a sophisticated blend of technology, design, and performance. These models cater to diverse applications, ensuring that sound professionals have the tools they need to deliver outstanding audio experiences, whether in fixed installations or mobile setups. Each speaker is designed with durability, performance, and versatility in mind, making them essential components for any audio system.
Top Page Image Contents