Attach Cooktop to Countertop

3-Wire Cable from Power Supply to 3-Wire Cable from Cooktop

IMPORTANT: Use the 3-wire cable from power supply where local codes permit connecting the frame-ground conductor to the neutral (white) junction box wire:

A	E
	E
B
	F
	G

	A. 3-wire cable from power	E. Junction box
	supply	F. White wire (from power supply)
	B. Red wires	G. UL listed wire connector
	C. Green or bare ground wire	H. Black wires
	(from cooktop)	I. UL listed or CSA approved
	D. 3-wire cable from cooktop	I. UL listed or CSA approved
	D. 3-wire cable from cooktop	conduit connector

1.Disconnect power

2.Remove junction box cover, if present.

3.Connect the flexible cable conduit from the cooktop to the junction box using a UL listed or CSA approved conduit connector.

4.Tighten screws on conduit connector if present.

5.Connect the two black wires together using the UL listed wire connectors.

6.Connect the two red wires together using the UL listed wire connectors.

7.Connect the green or bare cooktop cable wires to the white (neutral) wire in the junction box using the UL listed wire connectors.

8.Install junction box cover.

9.Reconnect power.

NOTE: This section applies only if you are using clamping brackets.

A	G
A
B	F
B
	E
	D

	C
A. Glass cooktop	E. 2½" (6.4 cm) clamping screw
B. Cooktop base	F. Countertop
C. Attachment screw	G. Foam seal
D. Clamping bracket (extends
far enough beyond cooktop
base to allow installation of
clamping screws)

1.Place the 2½" (6.4 cm) clamping screws into the outermost hole in the clamping bracket.

2.Use a screwdriver to tighten the screws against the countertop. Do not overtighten.

Complete Installation

1.Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped.

2.Check that you have all your tools.

3.Dispose of/recycle all packaging materials.

4.Use a mild solution of liquid household cleaner and warm water to clean cooktop before use. Dry thoroughly with a soft cloth. For more information, see the “Cooktop Care” section of the Use and Care Guide.

5.Read the “Cooktop Use” section in the cooktop Use and Care Guide.

6.Reconnect power.

NOTE: If the cooktop does not work after turning on the power, check that a circuit breaker has not tripped or a household fuse has not blown. See “Troubleshooting” section in the Use and Care Guide for further information.

If You Need Assistance or Service:

Please reference the “Assistance or Service” section of the Use and Care Guide or contact the dealer from whom you purchased your cooktop.

W10353374A specifications

The Whirlpool W10353374A is a high-performance dishwasher that combines functionality, efficiency, and modern design. This appliance is tailored for individuals and families seeking a reliable way to maintain clean dishes with minimal effort. With its advanced features and smart technologies, the W10353374A makes dishwashing a seamless task.

One of the standout features of the Whirlpool W10353374A is its SpaceSaver design. This dishwasher offers a customizable loading experience, optimizing space for varying dish sizes. Thanks to its adjustable upper rack and fold-down tines, users can easily accommodate larger pots, pans, and dishes, ensuring a thorough clean without the need for tedious handwashing.

The W10353374A employs the powerful sensing technology known as WashSense. This system automatically detects soil levels in the dishes and adjusts cycle lengths and selections accordingly. It ensures energy-efficient operations while consistently delivering sparkling-clean results. Additionally, the appliance features multiple wash cycle options, including options for normal, heavy, and quick wash, allowing users to choose the perfect setting based on the load's needs.

Noise levels are another concern when it comes to dishwashing. The Whirlpool W10353374A addresses this with its Quiet Wash design, which operates at a mere sound level of 47 dBA. This means that users can enjoy a peaceful kitchen environment even while the dishwasher is in full operation.

Efficiency is further highlighted through the Energy Star certification, indicating that the W10353374A consumes less water and energy compared to standard models. This not only benefits the environment but also helps users save on utility bills. The dishwasher comes equipped with a Soil Sensor, which plays a crucial role in ensuring effective cleaning by using just the right amount of water based on the level of dirt on the dishes.

Lastly, the stainless steel interior adds durability and presents a sleek look that suits various kitchen styles. The whirlpool W10353374A is designed with user-friendly controls, making it simple for anyone to select the desired wash cycle efficiently.

In conclusion, the Whirlpool W10353374A is an exceptional dishwasher that embodies practicality and innovation. With its SpaceSaver design, WashSense technology, and Energy Star certification, it provides an effective dishwashing solution for modern households.