Control knobs Solid element surface units

Caring For Your Cooktop

Bum And Electrical Shock Hazard

-Makesure all73ntrols are OFF and the cooktop is cool before cleaning. Failure to do so can result in burns or electrical shock.

NOTE: When cleaning, never use steel wool, abrasives, or commercial oven cleaners which may damage finish. When cleaning the cooktop with the control knobs removed, do not allow water to run down inside the unit. After cleaning, make sure ah control knobs point to the OFF position.

2. IMPORTANT: Dry the element

completely after cleaning. Turn on

the element for a few minutes to

thoroughly dry. After the element

has cooled, use a paper towel to

apply a thin coat of salt-free oil to

the surface units to season and

restore the finish, Wipe excess oil

off stainless steel trim rings. Then

The control knobs

Solid element surface units

heat 3 - 5 minutes. Somesmoking

may occur; this is normal. If surface

1.Turn control knobs to the OFF position.

2.Pull knobs straight off.

3.Wash in warm, soapy water.

4.Rinse well and dry completely. Do not soak.

The glass cooktop

1.Wipe with paper towel and hot, soapy water.

units have dark spots caused by

grease and food, the oil treatment

will improve their appearance but

not eliminate the spots.

NOTE: Optional Electrol” dressing

can be applied to the surface units

to improve their appearance.

3. The stainless steel trim rings will

yellow from the heat of the surface

units and pans. This is normal. The

yellowing can be removed by using

stainless steel cleaner or Cook Top

2.Wipe with paper towel and spray glass cleaner.

3.Use a non-abrasive plastic scouring pad for heavily-soiled areas.

NOTE: Make sure plastic scouring pad does not contain metal or abrasive particles. Do not use abrasive cleaners.

4.After removing soil, rinse well and wipe dry with a paper towel or soft cloth.

5.Replace control knobs by pushing them firmly into place.

1.For best results, wipe off surface units with a damp soft cloth and soapy water after each use.

Removeburned-on food with a soap-filled scouring pad. Rinse well. The red spot in the center of the surface unit will gradually wash off. This is normal and will not affect the operation of the surface unit.

Polishing Creme on the trim rings.

To obtain order information for

Cook Top Polishing Creme (Part No.

814009)or ElectroF dressing (Part

No. 814030).write to:

Whirlpool Corporation

Attention: Customer Service Dept.

1900Whirlpool Drive

LaPorte, IN 46305

Cleaning chart

Bum And Electrical Shock Hazard

Make sure all controls are OFF and the cooktop is cool before cleaning. Failure to do so can result in bums or electrical shock.

PART	WHAT TO USE		HOW TO CLEAN
Glass cooktop	Paper towel and hot, soapy water or	.	Wipe off regularly when cooktop is
	spray glass cleaner.		cool.
	Non-abrasive plastic scouring pad for	(See “Theglass cooktop” above for
	heavily-soiled areas.	more information.)
Trim rings	Stainless steel cleaner or Cook Top	.	Before cleaning, make sure the
	Polishing Creme (Part No. 814009)f		cooktop and the surface units are
			cool.

. Follow directions provided with cleaner or polishing creme.

NOTE: Yellowing of trim rings is normal from heat of the surface units and pans.

*See“Solidelement surface units” above for ordering information.

Page 4

4211866 specifications

The Whirlpool 4211866 is a high-quality refrigerator water filter that is designed to enhance the functionality and safety of your household water supply. This filter is engineered to provide improved taste and quality by reducing contaminants commonly found in tap water. It is compatible with various Whirlpool, Maytag, Amana, and KitchenAid refrigerator models, making it a versatile choice for many households.

One of the main features of the Whirlpool 4211866 is its advanced filtration technology. The filter utilizes a carbon block that effectively removes chlorine, lead, cysts, and other impurities from the water, contributing to a cleaner and fresher taste. This is particularly important for those who rely on their refrigerator for ice and water dispensation, ensuring that family members enjoy clean, safe water and ice at all times.

The installation process of the Whirlpool 4211866 is straightforward and user-friendly, allowing consumers to replace the filter without the need for specialized tools or skills. The filter is designed for quick and easy replacement, typically taking just a few minutes to complete. This convenience encourages regular maintenance, ensuring that your refrigerator continues to deliver purified water and ice.

Another characteristic that sets the Whirlpool 4211866 apart is its longevity. Depending on usage and water quality, this filter can last up to six months before needing a replacement. This longevity not only translates to cost savings for homeowners but also reduces the frequency of maintenance, making it a practical choice for busy families.

Additionally, the Whirlpool 4211866 is NSF certified, which means it meets strict safety and performance standards for water filtration. This certification provides peace of mind, knowing that you are using a product that has been tested and verified for its filtration efficacy.

In summary, the Whirlpool 4211866 is a reliable and effective water filter that enhances the quality of refrigerator water and ice. Its advanced filtration technology, ease of installation, longevity, and NSF certification make it an excellent choice for anyone seeking to improve their home's drinking water quality. By investing in this water filter, homeowners can enjoy cleaner, safer, and better-tasting water straight from their refrigerator.