Changing the control
If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 19.)
settings
l Adjust the Refrigerator Control first.
l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if nee’ded.
I | CONDITION: | REASON: |
|
| |
|
|
| |||
| If Refrigerator | Door | opened | often | |
| Section is | Large | amount | of food added | |
| TOO WARM | Room temperature | too warm | ||
| If Freezer | Door | opened | often | |
| Section is | Large | amount | of food added | |
| TOO WARM | Very | cold room temperature | ||
|
| (can’t | cycle often | enough) |
RECOMMENDED CONTROL SETTINGS:
Refrigerator 6
FreezerD
Refrigerator
Freezeri
If Refrigerator | Controls | not | set correctly | |||
Section is | for your | conditions | ||||
TOO COLD |
|
|
|
|
| |
If ICE | isn’t | Heavy | ice | usage | ||
MADE | FAST | Very cold | room temperature | |||
ENOUGH | (can’t | cycle | often enough) | |||
If BOTH | Door | opened | often | |||
SECTIONS | Large | amount of food added | ||||
are TOO WARM | Very warm or very cold room | |||||
|
| temperatures |
|
Refrigerator
Freezer:
Refrigerator
Freezeri
Refrigerator 6
FreezerC
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you use your refrigerator.
To remove glass shelves:
1.Remove items from shelf.
2.Tilt shefl up at front.
3.Lift back of shelf.
4.Pull shelf straight out.
To replace glass shelves:
1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.
2.Tilt sheff up at front until hooks drop into slots. Lower front of shelf to level position.