ADJUSTING THE REFRIGERATOR SHELVES
To remove the shelves:
1.Remove items from the shelf.
2.Slide shelf straight out to the stop.
3.Depending on your model, lift the back or front of the shelf over the stop.
4.Slide shelf out the rest of the way.
REMOVING THE CRISPER(S) AND COVER
To remove the crisper(s):
1.Slide crisper(s) straight out to the stop.
2.Lift the front.
3.Slide out the rest of the way.
4.Replace in reverse order.
To remove the plastic cover:
1.Lift cover front and remove the cover support.
2.Lift cover up and slide out.
To replace the cover:
1.Fit cover tabs into lowest cabinet slots and push in. Lower the front retainers into place.
2.Insert cover support (with the long tab toward the front) into the groove on the underside of the cover.
NOTE: If the support needs adjustment, turn base clockwise to raise or counterclockwise to lower.
To replace the shelves:
1.Slide back of shelf into shelf track in wall of cabinet.
2.Guide front of shelf into shelf track.
3.Slide shelf in all the way.
Tabs Cover support
Lower
11