Whirlpool RT16DKXDN03 Removing the base grille, Connecting to refrigerator, Connections AT

Page 19

Connecting to refrigerator

1.Disconnect the tube clamp on the back of the product and insert copper tubing through the clamp as shown at the right. Attach the copper tube to the valve inlet using a compression nut and sleeve as shown. Tighten the compression nut. Do not overtighten. Reattach the tube clamp and tube to the back of the cabinet. Move to step 2.

2.Turn shut-off valve ON. CHECK FOR LEAKS. TIGHTEN ANY CONNECTIONS

(INCLUDING

CONNECTIONS AT THE

Wate

VALVE) OR NUTS THAT LEAK.

3. The ice maker is equipped with a built-in

valve

 

water strainer. If local water conditions

 

require periodic cleaning or a well is your

 

source of water supply, a second water

 

strainer should be installed in the X-inch

 

water line. Obtain a water strainer from

 

your nearest appliance dealer. Install at

 

either tube

connection.

 

4. Reconnect electrical supply to refrigerator.

Removing the base grille

Burn Hazard

Do not touch refrigeration tubes near defrost pan.

Doing so can result in burns.

To remove the base grille:

1.Open the refrigerator door.

2.Grasp the grille with both hands.

3.Push down on the top edge of the grille to release the top clips.

4.Roll the grille toward you to release the top clips.

5.Pull grille away from the refrigerator.

NOTE: Do not remove the Tech Sheet fastened behind the grille.

Use only %-inch

1 copper tubing from

.I cold water line

nut and sleeve

Condenser Defrost

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Parts Features Before Using Your Refrigerator ContentsTable Of Contents Before YOU Throw Away Your OLD Refrigerator Or Freezer Refrigerator SafetyYour safety is important to us Proper disposal of your old refrigeratorControl panel all models Parts And FeaturesFreezer bottom Cleaning it before use Before Using Your RefrigeratorCleaning your refrigerator Installing it properlyPlugging it Leveling it Setting the controls Using Your RefrigeratorCondition Reason SettingsRecommended Control Settings Changing the controlRemoving the drop-in Cantilever glass or wire shelves Slide-out wire shelvesStyle Removing the meat drawer and coverSome Models Adjusting the crisper cover trackRemoving the crispers Crisper coverOn some models Adjusting the freezer shelfPossible CAUSE/SOLUTION Using the optional automatic ice makerIce maker problems ProblemTools Required Attaching the optional ice maker to a water supplyRead all directions carefully before you begin Cold water supplyConnecting to water line Valve or Nuts That Leak Connecting to refrigeratorRemoving the base grille Connections ATChanging the light bulbs Saving energy Understanding the sounds you may hearReversing the hinges Reversing the door swingReversing the handles Caring For Your Refrigerator HOW to CleanPart What Part What to USE Long vacations Vacation and movingCare Short vacationsQuestions? Power interruptionsStoring fresh food Food Storage GuidePackaging Storing frozen foodFreezing Check Following TroubleshootingIf you need assistance If you need serviceIf you are not satisfied with how the problem was solved Reauestinrr Assistance Or SerbiceWarranty

RT16DKXDN03 specifications

The Whirlpool RT16DKXDN03 is an innovative top-freezer refrigerator designed to offer modern convenience while maximizing storage and food preservation efficiency. This model is a part of Whirlpool's commitment to providing appliances that cater to the needs of the contemporary household.

One of the notable features of the RT16DKXDN03 is its spacious interior, which boasts a 16 cubic foot capacity. This roominess allows users to store a variety of food items without the need for constant organization. The refrigerator section is equipped with adjustable shelves, enabling consumers to customize their storage according to the size and shape of their groceries. The separate crispers for fruits and vegetables ensure that produce stays fresh for longer periods, as each is designed to maintain optimal humidity levels.

The freezer compartment offers ample space as well, providing easy access to frozen foods. The reversible door feature is another significant advantage, allowing users the flexibility to choose which way the door opens, making it easy to fit in different kitchen layouts.

In terms of energy efficiency, the RT16DKXDN03 is designed to meet the Energy Star requirements, which translates to lower energy bills and a reduced carbon footprint. This eco-friendly approach, combined with its reliable performance, underscores Whirlpool’s dedication to sustainability.

Among its advanced technologies, the refrigerator features adaptive defrost that intelligently senses the need for defrosting, which not only enhances food preservation but also improves the appliance's overall efficiency. The unit operates quietly, ensuring that it doesn’t disrupt the household ambiance.

The sleek and modern design of the RT16DKXDN03, available in various finishes, makes it a visually appealing addition to any kitchen. With its user-friendly controls and layout, this model exemplifies Whirlpool’s focus on creating appliances that are both practical and stylish.

Overall, the Whirlpool RT16DKXDN03 stands out for its spacious design, efficient energy use, advanced technology, and modern aesthetics. It provides a perfect solution for households looking for a reliable and stylish refrigerator that meets their daily needs while ensuring that food stays fresh and accessible.
Top Page Image Contents