Whirlpool W10193164A Accessories, Dispenser water is not cool enough on some models

Page 11

The ice dispenser will not operate properly

Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

Ice bin installed correctly? Be sure the ice bin is firmly in position.

New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

Ice clogged in the ice storage bin or delivery chute? Remove clogged ice, using a plastic utensil if necessary. Clean chute and bottom of storage bin using a warm moist cloth, and dry both thoroughly. To avoid clogging and maintain a fresh supply of ice, empty the storage bin and clean both the bin and delivery chute every two weeks.

Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

The water dispenser will not operate properly

Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

Is the water pressure at least 30 psi (207 kPa)? The water pressure to the home determines the flow from the dispenser. See “Water Supply Requirements.”

Kink in the home water source line? Straighten the water source line.

New installation? Flush and fill the water system.

Water filter installed on the refrigerator? The filter may be clogged or incorrectly installed.

Is a reverse osmosis water filtration system connected to your cold water supply? See “Water Supply Requirements.”

Water is leaking from the dispenser

NOTE: One or two drops of water after dispensing is normal.

Glass not being held under the dispenser long enough? Hold the glass under the dispenser for 2 to 3 seconds after releasing the dispenser lever/pad.

New installation? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

Recently changed water filter? Flush the water system. See “Prepare the Water System” or “Water and Ice Dispensers.”

The dispenser water is not cool enough (on some models)

NOTE: Water from the dispenser is chilled to only 50°F (10°C).

New installation? Allow 24 hours after installation for the water supply to cool completely.

Recently dispensed large amount of water? Allow 24 hours for water supply to cool completely.

Water not been recently dispensed? The first glass of water may not be cool. Discard the first glass of water.

Refrigerator connected to a cold water pipe? Make sure the refrigerator is connected to a cold water pipe. See “Water Supply Requirements.”

ACCESSORIES

To order replacement filters, call 1-800-442-9991and ask for the part number listed below or contact your authorized Whirlpool dealer. In Canada, call 1-800-807-6777.

Stainless Steel Cleaner and Polish:

Order Part #4396095

Standard Base Filter Cartridge:

Order Part #4396841 (T2RFWG2 and P2RFWG2)

11

Image 11
Contents Refrigerator User Instructions Refrigerator SafetyBefore You Throw Away Your Old Refrigerator or Freezer Installation InstructionsUnpack the Refrigerator Recommended Grounding Method LocationRequirementsElectrical Requirements Water Supply RequirementsStyle Connect Water SupplyReverse Osmosis Water Supply Refrigerator USE Using theControlsChilled Door Bin ConvertibleDrawer Temperature ControlCONDITION/REASON Adjustment Crisper Humidity ControlRemember Ice Maker and Storage BinTo Dispense Water To Dispense IceWater Filtration System CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingChanging the Light Bulbs Ice and Water Temperature and MoistureTemperature is too warm Standard Base Filter Cartridge AccessoriesStainless Steel Cleaner and Polish Dispenser water is not cool enough on some modelsWater Filter Certifications Base Grille Water Filtration System Performance Data SheetsBase Grille Water Filtration System Base Grille Water Filtration System Base Grille Water Filtration System Disclaimer of Implied Warranties Limitation of Remedies Limited WarrantyItems Excluded from Warranty This limited warranty does not coverRéfrigérateur Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions DinstallationExigences demplacement Déballagedu réfrigérateurAlimentation en eau par osmose inverse Méthode recommandée de mise à la terreSpécificationsélectriques Spécifications del’alimentationen eauRaccordement au réfrigérateur Raccordement de la canalisation deauRaccordement à une canalisation d’eau Utilisation DU Réfrigérateur Utilisation des commandesAchever l’installation Ajustement des commandesDistributeurs d’eauet de glaçons Commande de température dans Le tiroir convertibleCompartiment fraîcheur dansla porte Distribution de glace Machineà glaçons et bac dentreposageDistribution d’eau Nettoyage de votre réfrigérateur Entretien DU RéfrigérateurSystème de filtrationde leau NettoyageRemplacement des ampoules d’éclairage Le moteur semble fonctionner excessivement DépannageFonctionnement du réfrigérateur Le réfrigérateur ne fonctionne pasGlaçons et eau Température et humiditéCartouche du filtre de la base standard AccessoiresNettoyant et poli pour acier inoxydable Système de filtration deau de la grille de la base Feuilles DE Données SUR LA PerformanceSystème de filtration deau de la grille de la base 909 mg/L Mg/L ± 10 % 05 mg/L 97,4 Particules classe 4200 #/mL 1900 #/mL 99,9 La présente garantie limitée ne couvre pas Garantie DES Gros Appareils Ménagers Whirlpool CorporationGarantie Limitée Articles Exclus DE LA GarantiePage Whirlpool Corporation 10/09 All rights reserved W10193164A SP PN W10193165A

W10193164A specifications

The Whirlpool W10193164A is an innovative and versatile refrigerator water filter designed to enhance the quality of drinking water inside your home. This essential appliance accessory is compatible with various Whirlpool side-by-side and French door refrigerators, making it a popular choice among homeowners seeking to improve their household water supply.

One of the main features of the W10193164A is its advanced filtration technology, which effectively reduces a variety of contaminants, including chlorine, lead, and sediment. By doing so, it not only improves the taste and odor of your water but also ensures that you have access to cleaner, healthier drinking water. The filter utilizes a carbon block design, which has proven to be effective in retaining impurities while allowing essential minerals to remain in the water.

Installation of the W10193164A is a straightforward process, designed for user convenience. Most users can replace the filter in a matter of minutes without the need for additional tools, making it accessible to everyone, whether they are a seasoned DIYer or someone new to home maintenance. Additionally, the filter typically features a “filter change” indicator on the refrigerator, notifying users when it’s time to replace the filter for optimal performance.

The durability of the W10193164A is another noteworthy characteristic. With a lifespan of up to six months, this water filter provides continual high-quality water, saving you money and reducing waste compared to single-use bottled water. Furthermore, the filter meets rigorous industry standards, ensuring that it delivers reliable performance throughout its lifespan.

Eco-friendliness also plays a significant role in the appeal of the Whirlpool W10193164A. By choosing to use this filter, households can reduce their reliance on plastic bottled water, thus contributing to a more sustainable environment.

Overall, the Whirlpool W10193164A water filter embodies efficiency, convenience, and reliability, making it an essential accessory for any Whirlpool refrigerator. By investing in this filter, homeowners can enjoy peace of mind knowing that they are providing their families with safer, better-tasting water straight from their refrigerator.