Whirlpool TTI4CK, TT20AK, TT2OBK, TTI 6CK, TTI 6DK, TT14EK Using Your Refrigerator-Freezer

IJ

Using Your Refrigerator-Freezer

Setting the controls Changing control settings

Controls for the refrigerator and freezer are in the refrigerator. When the refrigerator is plugged in for the first time:

1.Set the Refrigerator Control to 3 (lT20AK and TT20BK to 4).

2.Set the Freezer Control to B (lT20AK and TT20BK to C).

3.Let the refrigerator and freezer compartments get cold for several hours before adding food.

4.When the refrigerator keeps milk or juice as cold as you like and the freezer compartment keeps ice creain firm, the settings are correct for your household.

1.Adjust the Refrigerator Control according to the settings listed in the chart below.

2.Wait 24 hours or more before making additional adjustments to the Refrigerator Control or adjusting the Freezer Control.

Condition

Refrigerator section

TOO WARM

Freezer section

TOO WARM

Both sections

TOO WARM

Check if

lDoor is opened often.

lLarge amount of food added. l Too-warm room temperature.

lDoor is opened often.

lLarge amount of food added.

. Too-cold room temperature (freezer can’t cycle often enough).

lDoor is opened often.

. Large amount of food added.

lToo-warm or too-cold room temperatures.

Set control	setting	lT2OAK and
		lT2OBK

Refrigerator 4

Freezer C

Refrigerator 3

Freezer A

Refrigerator	4	6
Freezer	B	C

Refrigerator section

TOO COLD

Ice is not made fast enough

l	Controls not set correctly.		Refrigerator	2	2
			Freezer	B	A
l	Heavy ice	usage.	Refrigerator	3	4
l	Very cold	room temperature	Freezer	A	A
	(fre’ezer can’t cycle often enouqh).

Exterior moisture control

The Exterior Moisture Control operates electric heaters around the door openings. These heaters help keep moisture from forming on the outside of the refrigerator.

EXTERIORMOISTURE CONTROL

4 OFF 0 ON b

mm

1.Use the OFF setting when humidity is low.

2.Use the ON setting if moisture forms on the outside of the refrigerator.

Adjusting refrigerator shelves

Models lT14CK, lT14EK, lTl6CK, TTlGDK, lTl8CK and lT18EK

To remove:

1.Remove food from shelf.

2.Slide shelf straight forward to the guide stops.

3.Lift front until it clears stops, then slide shelf out the rest of the way.

To replace:

1.Fit back of shelf on top of guides with wire stops on the bottom of the guides.

2.Lift front; slide shelf in until it clears guide stops. Slide shelf in the rest of the way.

Models lT2OAK and TTSOBK To remove:

1.Remove food from shelf.

2.Tilt up front.

3.Lift up back until hooks clear the shelf support slots.

4.Pull shelf straight out.

To replace:

1, Guide the rear shelf hooks into shelf support slots.

2.Tilt up front until hooks drop into slots. Lower front of shelf to level position.

Page 6