Whirlpool TT21AKXKQ02 Location Requirements, Electrical Requirements, Water Supply Requirements

Page 3

Location Requirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹/₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15 or 20 amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) to OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Read all directions carefully before you begin.

IMPORTANT:

■If you turn the refrigerator on before the water line is connected, turn the ice maker OFF.

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

TOOLS NEEDED: Flat-blade screwdriver, ⁷⁄₁₆" and ¹⁄₂" open-end wrenches or two adjustable wrenches, ¹⁄₄" nut driver and drill bit, hand drill or electric drill (properly grounded).

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Refrigerator USE & Care Guide Refrigerator SafetyRemove the Packaging Installation InstructionsClean Before Using Unpack the RefrigeratorRecommended Grounding Method Location RequirementsElectrical Requirements Water Supply RequirementsConnect to Water Line Connect the Water SupplyWater Pressure Reverse Osmosis Water SupplyReplace Doors and Hinges Refrigerator DoorsRemove Doors and Hinges Reverse Doors optionalDoor Removal Replacement Door Closing Adjust the DoorsUsing the Controls Refrigerator USEIce Maker Crisper Humidity ControlChanging the Light Bulbs CleaningTo Clean Your Refrigerator Refrigerator CareRefrigerator Operation TroubleshootingIce and Water Temperature and MoistureEstate Refrigerator Warranty Whirlpool Corporation will not pay for2302077

TT21AKXKQ02 specifications

The Whirlpool TT21AKXKQ02 is a notable addition to Whirlpool's lineup of high-efficiency refrigerators that cater to the needs of modern households. This model exemplifies a blend of innovative technology, spacious design, and energy efficiency, making it a perfect choice for both small and large kitchens.

One of the standout features of the Whirlpool TT21AKXKQ02 is its Smart Storage design, which maximizes interior space and enhances organization. With adjustable shelves and door bins, users can easily store a variety of items, from large bottles to small condiments. The refrigerator also includes specialized compartments, such as humidity-controlled crisper drawers that help preserve fresh fruits and vegetables, ensuring they stay crisp and nutritious for longer.

In terms of cooling technology, the TT21AKXKQ02 is equipped with Adaptive Intelligence, a system that monitors the internal environment and adjusts cooling settings to maintain optimal freshness. This technology not only helps in extending the shelf life of perishable items but also ensures consistent cooling performance, regardless of external temperature changes.

Furthermore, this refrigerator features a No Frost technology that eliminates the need for manual defrosting. The system works by circulating cool air throughout the unit, preventing ice buildup and ensuring that users enjoy the convenience of a maintenance-free appliance. Alongside this, the model boasts a quiet operation, making it suitable for open-concept living spaces.

Energy efficiency is a key characteristic of the Whirlpool TT21AKXKQ02. It is designed to operate with a lower energy consumption rate, earning it a commendable energy rating. This not only contributes to reduced electricity bills but also supports environmentally friendly practices.

Aesthetic-wise, the TT21AKXKQ02 combines a sleek exterior with an elegant finish that can seamlessly blend into any kitchen decor. The user-friendly controls and LED lighting inside the refrigerator enhance visibility and accessibility, making it easy to find items even in low light.

In summary, the Whirlpool TT21AKXKQ02 embodies the ideal combination of space efficiency, advanced cooling technology, and energy conservation. It reflects Whirlpool's commitment to providing practical and innovative solutions for everyday refrigeration needs, making it an excellent choice for any home.
Top Page Image Contents