Installation Instructions

UnpacktheRefrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Removing the Packaging

■Remove tape and glue from your refrigerator before using. To remove any remaining tape or glue, rub the area briskly with your thumb. Tape or glue residue can also be easily removed by rubbing a small amount of liquid dish soap over the adhesive with your fingers. Wipe with warm water and dry.

■Do not use sharp instruments, rubbing alcohol, flammable fluids, or abrasive cleaners to remove tape or glue. These products can damage the surface of your refrigerator. For more information, see “Refrigerator Safety” section.

■On some models, shelves, bins, door shelf rails, and other feature parts may be packaged in the Interior FeaturePak. Follow the instructions contained in the package for proper assembly.

IMPORTANT: Do not remove the white foam air return insert that is located behind the control panel on the ceiling of the refrigerator (on some models). The insert is part of the refrigerator and not part of the packing material. If the insert is removed, ice may migrate down from the freezer and cause icicles to form.

When Moving Your Refrigerator:

Your refrigerator is heavy. When moving the refrigerator for cleaning or service, be sure to protect the floor. Always pull the refrigerator straight out when moving it.

Do not wiggle or “walk” the refrigerator when trying to move it, as floor damage could occur.

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator before using it. See the cleaning instructions in “Refrigerator Care.”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold. Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, tempered glass is designed to shatter into many small, pebble-size pieces. This is normal. Glass shelves and covers are heavy. Use special care when removing them to avoid impact from dropping.

LocationRequirements

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

To ensure proper ventilation for your refrigerator, allow for a ¹/₂" (1.25 cm) space on each side and at the top. When installing your refrigerator next to a fixed wall, leave 2" (5.08 cm) minimum on each side (depending on your model) to allow for the door to swing open. If your refrigerator has an ice maker, allow extra space at the back for the water line connections.

NOTE: Do not install the refrigerator near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 55°F (13°C).

1/2" (1.25 cm)

2" (5.08 cm)

8ET8MTKXKT04 specifications

The Whirlpool 8ET8MTKXKT04 is a high-performance refrigerator that combines cutting-edge technology with practical design to enhance your culinary experience at home. This model is particularly designed for users seeking efficiency and style in their kitchen appliances.

One of the standout features of the Whirlpool 8ET8MTKXKT04 is its energy efficiency. With an impressive Energy Star rating, this refrigerator helps consumers save on electricity bills while also minimizing their carbon footprint. The appliance is equipped with advanced cooling technologies that ensure consistent temperature regulation throughout the fridge and freezer compartments.

The refrigerator also includes an innovative Adaptive Defrost feature. This technology allows the fridge to monitor how often the freezer is accessed and defrosts only when necessary, which not only saves energy but also enhances food preservation. Moreover, the Accu-Chill Temperature Management System is another notable characteristic that intelligently senses and adjusts cooling for optimal food storage, ensuring that groceries stay fresh for longer periods.

Storage is a major consideration in the design of the 8ET8MTKXKT04. The refrigerator features adjustable shelves, allowing users to customize their storage options based on individual needs. The crispers are specially designed to maintain humidity, keeping fruits and vegetables fresh. Additionally, the unit boasts ample door storage, which can accommodate large bottles and condiments with ease.

Another innovative feature is the FreshFlow Air Filter, which filters out odors and ensures fresher air circulation within the fridge. This technology helps in maintaining the quality of food stored inside, translating into better taste and longevity. The exterior design is sleek and modern, available in various finishes to complement different kitchen styles.

For added convenience, the Whirlpool 8ET8MTKXKT04 includes LED interior lighting that not only illuminates the contents clearly but is also energy-efficient. The exterior is designed with easy-to-use controls, allowing users to set preferences effortlessly.

In conclusion, the Whirlpool 8ET8MTKXKT04 stands out for its energy-efficient features, advanced cooling technologies, adjustable storage options, and modern aesthetics. It represents a perfect blend of functionality and style, making it an ideal addition to any contemporary kitchen. Whether you are storing groceries for weekly meals or preserving leftovers, this refrigerator has the features to meet all your needs.