To reinstall shelf:
1.Hold shelf at front and back.
2.Tilt front of shelf up to a 45” angle to track.
3.Insert both rear shelf slides into upper channel of track.
4.Lower front of shelf to a level position.
NOTE: Make sure both rear shelf slides are securely in the track before letting go of shelf.
Adjusting the cantilever
Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.
To remove glass shelves:
1.Remove items from shelf.
2.Tilt shelf up at front.
3.Lift back of shelf.
4.Pull shelf straight out.
To replace glass shelves:
1.Guide the rear shelf hooks into the slots in the shelf supports on cabinet wall.
2.Tilt shelf up at front until hooks drop into slots. Lower front of shelf to level position.
Upper channel , of track
Insert rear shelf slides into upper channel of track.
refrigerator shelves
Glass shelves are heavy. Be careful.
Removing the meat drawer and cover
To remove the meat drawer:
1.Slide meat drawer out to the stop.
2.Lift front of meat drawer.
3.Slide meat drawer out the rest of the way.
4.Replace in reverse order.
To remove the cover:
1.Tilt front of cover up.
2.Lift back of cover.
3.Pull cover straight out.
4.Replace cover in reverse order.
Pull out to the stop, lift the front and pull again.