Whirlpool RB2000XV manual Using the Oven Controls, Baking

I I

Using the Oven Controls

Baking

1.Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out.

2. Set the Oven Selector to BAKE.

4.Put food in the oven. NOTE: Oven racks, walls and door will be hot.

During baking, the elements will turn on and off to keep the oven temperature at the setting. The Oven Signal Light will turn on and off with the elements.

The rack(s) should be placed so the top of the food will be centered in the oven. Always leave at least lY2 to 2 inches (4-5 cm) between the sides of the pan and the oven walls and other pans. For more information,

see the Cooking Guide.

3.Set the Oven Temperature Control to the baking temperature you want. The Oven Signal Light will come on. The oven is preheated when the Oven Signal Light first

5.When baking is done, turn both the Oven Selector and Oven Temperature Control to OFF.

The top element helps heat during baking, but does not turn red.