Installing it properly
1.Allow l/i inch (1.25 cm) space on each side and at the top of the refrigerator for ease of installation.
2.If the refrigerator is to be against a wall, you might want to leave extra space on the hinge side closest to the wall so the door can be opened wider.
3.The refrigerator can be flush against the wall.
4.Make sure ice maker water supply has been connected. Refer to Installation Instructions.
Leveling | it |
|
|
|
| |
Your refrigerator | has 2 front leveling |
| Right | to | raise; | |
on | the right and one on the left. | AI | left to | lower | ||
To adjust one or both of these, follow the |
| Use | a screw- | |||
directions | below. |
| ||||
| driver | to adjust | ||||
|
|
|
|
1.Remove base grille. (See page 18.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counterclock- wise.
4.Check with level.
5.Replace base grille. (See page 18.)
6