Whirlpool ED19CK manual Adjusting the refrigerator shelves, Removing freezer shelves

Adjusting meat pan temperature.. .

Cold air flows against the meat pan through an opening between the freezer and the refrigerator. This helps keep the meat pan colder than the rest of the refrigerator

Set the control to let more or less cold air through.

Use Control to Adjust

Meat Pan Temperatures

Adjusting the refrigerator shelves...

Shelves can be adjusted to match the way you use your refrigerator. If your model has gloss shelves, be careful. They are heavy

To remove shelves:

1.Tilt up at front.

2.Lift up at back.

3.Pull shelf straight out.

To replace:

1. Guide the rear hooks into the slots In the shelf supports.

2. Ilt up front of shelf until hooks drop into slot. Lower front of shelf to level position.

Removing freezer shelves.. .

1 Lift front slightly

2.Lifi back off supports.

3.Replace in reverse order

Lift the Front

Then the Bat

Removing the crisper, meat pan and covers...

Removing:

1.	Slide	crisper and meat	pan straight out to stop
2.	Lift the front			C
3.	Slide	the rest of the way	out.

4 Replace in reverse order

Replacing:

l Covers are held in place by two pegs at the back and two notched tabs in front.

1.Press front tabs out of the way

2.Lifl cover front.

3.Lift back off the pegs.

4.Replace In reverse order.

Removing freezer bin.. .

For proper air movement, keep the freezer bin in place when the refrigerator is operating.

To remove the bin:

l

l

l

Slide out to the stop.

Lift the front to clear the stop. Slide out the rest of the way.

To replace the bln:

l

l

l

Place bin on the slides. Make sure the stops Clear the front of the slides. Slide bin in.

6