Quick starting steps, Hot water is a must

Quick starting steps

1.Properly load the top and bottom racks, sil- verware basket and cutlery basket.

2.Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.

3.Add detergent.

4.Check rinse aid dispenser.

PQWER CLEAN’” washing system

Yourdishwashercleans by spraying a mixture

of hot, clean water and detergent against soiled surfaces of dishes. When a cycle is started, the dishwasher fills with water to about the level of the heating element. This water is

pumped through the rotating spray arms, through the POWER CLEAN Module which re- moves food particles, and back through the rotating spray arms. Soiled water is pumped out and replaced with clean water during a cycle - the number of times depends on the cycle being used.

load dishes so soiled surfaces face powerful spray from rotating arms.

5.Close and latch door.

6.Run hot water at sink nearest dishwasher until it is hot. Turn it off.

7.Select a cycle.

8.Select an option.

9.Press START.

Step-saving preparation for washing

It is not necessary to rinse dishes before putting them into the dishwasher. Just remove large pieces, bones, and other hard items. The POWER CLEAN Module will remove food parti- cles from the water. It contains a chopping de- vice which will reduce the size of food items.

If hard items such as fruit seeds, nuts and egg shells enter the POWER CLEAN Module, you

might hear chopping, grinding, crunching or buzzing sounds. Those sounds are normal when hard items enter the module. DO NOT LET METALLIC ITEMS (I.E. POT HANDLE SCREWS) GET INTO THE POWER CLEAN MODULE. THIS COULD RESULT IN DAMAGE TO THE POWER CLEAN MODULE.

Hot water is a must

Hot water dissolves and activates the dish- washing detergent. Hot water dissolves grease on dishes and helps dry glasses spot-free. Make certain loads are washed in hot water (at least 140°F - 60°C). Two ways to have a reliable hot water supply...

1.Maintain 140°F water supply at central water heater. To check water temperature, turn on hot water faucet nearest the dishwasher. Let water run until it is as hot as possible, then check with a candy or meat thermometer. If

the temperature is too low, have a qualified person raise the water heater thermostat setting.

2.Use HI-TEMP WASHING Option. If water heating is needed, a thermostat will delay the cycle

until temperature reaches 145°F (63°C). If water is hot enough, the cycle will proceed with no delay. This lets you turn down your water heater, if you choose, without cutting back on hot water needed for good dish- washing.

Quiet operating tips

To avoid thumping and clattering noises during operation:

l Makesure lightweight load itemsare secured in the rack.

l Make sure pot lids and handles, pizza pans, cookie sheets, etc. do not touch interior walls

or interfere with either of the spray arms rotation.

l Load dishes so they don’t touch one another.

NOTE: Keep sink drain plugs Inserted durfng dlshwasher operatlon to prevent nolse trans- fer through drains.

DU9450XT specifications

The Whirlpool DU9450XT is a standout in the world of dishwashers, combining efficiency with user-friendly features to meet modern household demands. This model is particularly notable for its powerful cleaning capabilities and innovative technology that enhances the dishwashing experience.

One of the main features of the Whirlpool DU9450XT is its advanced Sensor Cycle. This technology automatically detects the level of soil on your dishes, adjusting wash times and water usage accordingly. This means that whether you have lightly soiled plates or heavily soiled pots and pans, the dishwasher optimizes the cleaning performance, ensuring that every wash is as efficient as possible.

Another key characteristic is its Quiet Wash system, designed to minimize noise during operation. Many households appreciate a peaceful kitchen environment, and this model operates at a decibel level that makes it easy to carry on conversations, watch TV, or relax without interruption. The insulation and sound-dampening materials used in its design contribute to this impressive noise control.

The Whirlpool DU9450XT also boasts a robust wash system with a unique spray arm that reaches every corner of the dishwasher for thorough cleaning. The adjustable upper rack allows users to rearrange their dish placements to accommodate larger items, which enhances flexibility and usability in load management. Additionally, the model features a SMART soil sensor to further refine cleaning processes, ensuring that even the most stubborn stains are tackled effectively.

Energy efficiency is another standout feature. The DU9450XT is ENERGY STAR certified, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only helps households save on utility bills but also reduces the environmental impact associated with dishwashing.

Interior space is well-designed, providing ample room for various dish sizes and types. The durable stainless steel interior enhances aesthetics while promoting better drying performance. A unique feature is the built-in food disposer that breaks down food particles, preventing clogging and ensuring that dishes come out clean every time.

Overall, the Whirlpool DU9450XT offers a blend of advanced technology, user-centric design, and energy efficiency, making it an excellent choice for those looking for a reliable and effective dishwasher solution that caters to modern kitchen needs. Its thoughtful features ensure convenience, while its performance highlights Whirlpool’s commitment to quality in home appliances.