Whirlpool DU4500XR Series manual Selecting a cycle, Changing a setting

Selecting a cycle

POTS & PANS Cycle

Maximum cleaning for cooked- or baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145°F (63°C) in both washesand the last rinse (marked l ). Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

NORMAL WASH Cycle

For normal, everyday soiled loads. [the Energy Guide Label data is based on this cycle.] Cycle time is about 60 minutes.

LIGHT WASH Cycle

For pre-rinse or lightly soiled loads.

Cycle time is about 55 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY only.

Changing a setting

You can change a setting anytime during any cycle.

1.Press in the door latch to unlatch the door and stop the cycle.

2.Turn the Cycle Control Knob clockwise to the cycle you want.

3.Be sure the detergent dispensers are filled properly for the new cycle.

4.Close and latch the door. The dishwasher will

automatically start the new cycle.