Whirlpool DU6000XR Series manual Clean Signal Light, Reset Options Button

The CLEAN Signal Light

The CLEAN Signal Light will come on when a washing cycle is complete.

To turn it off. Turn the Control Knob clockwise slightly until the light goes off

The RESET OPTIONS Button

If you want to change a selected Option. push the RESET OPTIONS Button. Reselect an option, if desired.

Energy saving tips

You can help save energy if you:

1.Wash full loads. Running a half-ftlled dish- washer uses the same amount of electricity and hot water as a fully loaded machine.

3.Alr dry dlrher when you don’t need a rapid drylng cycle Allow longer dryrng times (overnlght).

2.Use the LOW ENERGY WASH Cycle whenever possible. It uses less hot water and energy than otherwash cycles.

4.load correctly for best washing results. In- correct loading may cause poor washing and the need to rewash all or part of the load.

5, Don’t pre-rlnse normally soiled dishes. Se- lect the correct cycle for the load and use

the recommended amount of detergent for good washing results without hand rinsing.

6, Use Your dlshwasher during off-peak hours.

Local utilities recommend this to avoid heavy usage of energy at certain times of day.

7.Kitchen cleanup can be done quickly and efficiently through the use of your dishwasher.

Most appliance parts that can fit in the dish-

washer	can be	cleaned	by	it. Burned-on soil,
however,	should	be	cleaned	by hand.