Before starting your dishwasher
1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely
2.Close and latch the door.
3.Run hot water at sink nearest dish- washer until it is hot. Turn it off.
Clean selector Buttons Option I
Starting your dishwasher
POTS & PANS Cycle...
1.Make sure Cycle Control Knob points to dot marked POTS & PANS.
2.Push POTS & PANS Clean Selector Button.
3.Push button for option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
LOW ENERGY WASH Cycle...
4. Push LOW ENERGY WASH Button.
2.Turn Cycle Control Knob clockwise to dot marked LOW ENERGY WASH.
3.Select option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
HEAVY WASH Cycle...
1.Make sure Cycle Control Knob points to dot marked HEAVY WASH.
2.Push HEAVY WASH button.
3.Push button for option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
NORMAL WASH Cycle...
1.Turn Cycle Control Knob clockwise until it stops at dot marked NORMAL WASH.
2.Push NORMAL WASH button,
3.Push button for option desired.
4.Without turning it, pull out the Cycle Control Knob to start the cycle.
Changing a setting
You can change a setting anytime during any cycle
1.Push in the Cycle Control Knob to stop the cycle.
To add a dish after starting
1.To be sure the added Item IS washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH
2.Unlatch the doorto stop the cycle, but don’t open it until the spray arms stop spinning
3.Open the door and add the dish
HI-TEMP WASHING Option
When this option is selected, water for the main wash and the frnal rrnse is heated (except
RINSE & HOLD Cycle...
1.Select AIR DRY Option only.
2.Turn Control Knob clockwise to dot marked RINSE & HOLD.
3.Pull Control Knob out to start cycle.
2.Turn the Cycle Control Knob clockwise to the cycle you want
3.Be sure detergent dispensers are filled properly for the new cycle.
4.Pull out the Cycle Control Knob to start the cycle.
4.Close the door. Do not latch it. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restari- ing the cycle.
5.Latch the door The dishwasher WIII start from where it stopped
in RINSE & HOLD] to 145 F (63 C). Washing and rinsing action in those parts of the cycle will be longer If the water is heated.
a