SMX-211 MIXER FEATURES
TOP & FRONT PANEL
1.Input fader - Controls individual source levels (channels) in the mix.
2.Input toggle switch - Selects which source will be active based on what you have connected to the rear panel input section (phono/line).
3.Treble and Bass EQ - Adjusts the high and low frequency levels of the input channels for good sound.
4.Channel Gain - Adjusts the
5.Replaceable Crossfader - Achieves clean segues between the two input channels. "Hard left" selects Channel 1. "Hard right" selects Channel 2. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues (fades) from one selected channel to the other.
Note: The crossfader is user replaceable in case of failure. Simply unscrew the two large screws which hold it in place, lift it out and disconnect itís cable.
6.Mic Input Gain - Adjust s microphone input level.
7.Mic Input - Insert your Micr ophone with 1/4 plug in here.
8.Headphone Input - Insert in the 1/4 plug for your headphones here.
9.Channel Cue / Cue Pan - Used to preview channel audio to your headphones. Listen here before bringing up channel faders or moving the crossfader.
10.Headphone Level ñ Adjusts cue volume.
11.Master Fader - Controls the overall output level.
REAR PANEL
18 17 16 15 14 13 12
12.Grounding post - for turntable connection. Always use this connection when using standard turntables with ground cable. (Some turntables like the
13.Phono Inputs - Plug your turnt ables in here. When these connectors are used, your signal is fed directly to the
14.Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs, cassette and
NOTE: Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.
15.Stereo Main Outputs - Unbalanced RCA connectors controlled by the Master fader.
16.Fader Start - This function works in conjunction with a compatible fader start CD player. When used with a compatible CD player, you can use the crossfader to start and stop the CD player with the slide of the fader. The fader start switch activates the fader start feature. When in the ON position, the fader start allows the fader to return automatically to preset digital CUE POINTS on your compatible STANTON DJ CD Player.
17.Power Connector - Plug in power adapter here and check the voltage level to match your countryís standard.
18.Power Switch - turns unit off and on. Note*** Remember to turn ALL volume levels down when turning on/off the unit.