Whirlpool DU7503XL manual Selecting a cycle, Changing

Water Heating ifold Signal Light DELAY &ART Signal Light Cycle Contr& Knob

Selecting a cycle

POTS (Ir PANS Cycle

Maximum cleaning for cooked- & baked-on foods. Timer delays while

the dishwasher automatically heats the water to 145°F (63°C) in both washes and the last rinse (marked ‘). Cycle time will be about IYz to 2

hours, depending on time needed to heat water.

HEAVY WASH Cycle

A double wash for heavily soiled loads. Cycle time is about 70 minutes.

NORMAL WASH Cycle

For normal, everyday soiled loads. (The Energy Guide Label data is based on this cycle.) Cycle time is about 60 minutes.

LOW ENERGY WASH Cycle

For pre-rinsed or lightly soiled loads. Cycle time is about 55 minutes.

CHINA CRYSTAL Cycle

A shortened wash and gentle dry for china and crystal. The heating element cycles on and off during the “dry” part of the cycle. Cycle time is about 35 minutes.

RINSE & HOLD Cycle

For rinsing a few items to be washed one or more days later. Cycle time is about 10 minutes.

Use AIR DRY only. Do not use HI-TEMP WASHING Option.

Changing

a setting

2.

Turn

the

Cycle

Control Knob clockwise

to

the

Cycle you

Want.

You can

change

a setting

anytime

during

3.

Be

sure

detergent

dispensers

are filled

any

cycle

properly for the new cycle.

1.

Push in

the

Cvcle

Control

Knob to

stop the

4.

Pull

out

the Cycle

Control Knob

to start

the

cycle.

’

cycle.

The RESET OPTIONS Button If you want to change a selected option, push the RESET OPTIONS Button. Re-select an option, if desired.

9