5.3Using DaRouter
When using DaRouter, there are two basic types of presets that you may utilize; generic and application specific. The generic preset allows you to configure the application to the SCS.1 controllers through conventional MIDI Learn. However, the application specific presets are designed to work specifically with certain applications and provide logic in the SCS.1 controllers that is focused towards that application.
5.4Loading a Preset
Confirm that no preset is loaded and your SCS.1 controller(s) is connected. At this point, you may select the preset you wish to use and then read its included documentation by clicking the “?” button. Also, remember to check the Stanton website for the latest presets as they are constantly being updated to support new functionality and applications!
5.5Using a Preset for the First Time
1)Select the desired preset you would like to use d epending on which application you are using DaRouter with.
2)Move any faders, switches or knobs on the SCS.1 controllers, to confirm feedback is making its way into DaRouter and the unit should load the preset and stop flashing.
3)Now you are ready to use the preset.
Important Click the “?” button next to the preset (Figure 5.7) to read its included HTML documentation which explains setting up the host application and the functionality of the SCS.1 controllers with that particular preset.
Figure 5.7
For more information about the specific SCS.1 presets always check the Stanton website for the latest presets and documentation.
27