Before starting your dishwasher

1.Read “Important Safety Instructions” on page 2 before starting your dishwasher.

2.Spin the Upper and Lower Spray Arms to make sure nothing will stop them from turning freely.

3.Push door firmly when closing and it will auto- matically latch.

4.Run hot water at sink nearest dishwasher until it is hot. Turn it off.

CYCLE SELECTOR BUllON

OPTION SELECTOR BUTTON

Starting your dishwasher

POTS & PANS Cycle...

1.Turn Cvcle Control Knob clockwise to dot markedl POTS &. PANS. [POTS & PANS and NOR- MAL WASH Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.) The dishwasher will auto- matically start.

2.Push the POTS & PANS Selector Button only. (The HEAT DRY option is preset. The AIR DRY option cannot be selected.)

LIGHT WASH Cycle...

1.Turn Cycle Control Knob clockwise to dot marked LIGHT WASH. The dishwasher will au- tomatically start.

2.Push the HEAT DRY or AIR DRY Selector Button.

NORMAL WASH Cycle...

1.Turn Cycle Control Knob clockwise to dot marked NORMAL WASH. (NORMAL WASH and POTS & PANS Cycles share the same spot on the dial. The Selector Buttons determine which cycle operates.) The dishwasher will

automatically start.

2.Push the HEAT DRY or AIR DRY Selector Button.

RINSE & HOLD Cycle...

1.Turn Cycle Control Knob clockwise to dot marked RINSE & HOLD. The dishwasher will

automatically start.

2.Push the AIR DRY Selector Button only.

Selecting a cycle

POTS 81PANS Cycle

Maximum cleaning for cooked- or baked-on foods Timer delays while

the dishwasher automatically heats the water to 145 F (63 C] in both washes and the last rinse (marked l ). Cycle time will be about 1% to 2

hours, depending on time needed to heat water.

NORMAL WASH Cycle

A double wash for normal to heav- ily soiled loads. (The Energy Guide Label data IS based on this cycle.] Cycle time IS about 63 minutes.

LIGHT WASH Cycle

For normal,everyday soiled loads Cycle time is about 58 minutes.