Stanton SMX.311 manual Troubleshooting, Mixer sounds noisy

Page 10

 

 

Troubleshooting

4.

Troubleshooting

 

 

 

 

 

Problem / Symptom

Possible Cause / Solution

 

no Sound.

Is the power ON? Based on your connections, check that you

 

 

have properly set the Channel Input (Phone-Line). Make sure

 

 

that the Input Gain, Channel Fader, and Master output are

 

 

turned up. Make sure the channels are properly assigned to the

 

 

Crossfader.

 

 

 

 

no Sound-Headphones.

Check the Cue Level, Cue Mix, and Cue button settings.

 

 

 

 

Mixer sounds noisy.

If a microphone is not being used, move the Mic switch to the

 

 

OFF position and turn all its related controls down.

 

 

 

 

Microphone doesn’t work.

Is the Mic Level turned up? Does the microphone require

 

 

phantom power? This mixer does not provide microphone

 

 

phantom power.

 

 

 

 

Sound is distorted-line input.

Turn down the Input Gain Control. Check EQ settings.

 

 

 

 

Sound is distorted-Phono input.

Only plug turntables into this input, do not plug in CD players or

 

 

other Line Level sources. Turn down the Input Gain Control and

 

 

check EQ settings.

 

 

 

 

i hear hum.

Make sure you are using good shielded audio cables. Some less

 

 

expensive audio cables can be susceptible to hum and

 

 

interference. Keep your audio cables away from AC power cables

 

 

and AC transformers. Make sure the mixer is not mounted too

 

 

close to high power amplifiers or lighting equipment power

 

 

supplies or ballasts. Make sure your turntables are properly

 

 

grounded to the back of the mixer if they include a grounding

 

 

wire.

 

 

 

 

i hear feedback.

If you are using a microphone, make sure that you are not too

 

 

close to the speakers or headphones. If you hear feedback on

 

 

the Phono Input, then the turntable may be mounted to close

 

 

to the speakers and/or subwoofer. Also, make sure the turntable

 

 

base is placed on a surface that does not vibrate or resonate

 

 

easily when the speakers are turned up loudly.

 

 

 

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents SMX.311 Important Safety instructions Iii Introduction Introduction Welcome to the SMX.311Quick Setup Diagram SMX.311 Description Top Panel SMX.311 Description Top Panel SMX.311 Description rear Panel SMX.311 Description front Panel Front Panel FigureTroubleshooting Mixer sounds noisyRegistration Card Thank you for choosing StantonStanton Warranty Stanton WarrantySpecifications Input / output impedance & sensitivityPage Page LITS00058 11/17/2009

SMX.311 specifications

The Stanton SMX.311 is a professional DJ mixer designed for both novice and experienced DJs. This 2-channel mixer is well-known for its durability, high-quality audio performance, and user-friendly interface, making it a popular choice for clubs, mobile DJs, and home studios alike.

One of the standout features of the SMX.311 is its premium audio quality. The mixer is equipped with an advanced 24-bit digital signal processing system, which ensures that sound quality remains pristine, delivering rich and vibrant audio. This is complemented by an efficient signal-to-noise ratio, minimizing interference and distortion for a clean output even at high volumes.

The SMX.311 boasts an intuitive layout that facilitates seamless mixing. Each channel comes with a 3-band EQ, allowing DJs to adjust the low, mid, and high frequencies with precision. This enables easy blending of tracks and creative sound manipulation without losing clarity. Additionally, the mixer features individual channel gain controls, which help to maintain a balanced output.

Another impressive feature of the Stanton SMX.311 is the built-in effects processor. This allows DJs to apply a variety of effects, such as echo, delay, and flanger, to enhance their mixes dynamically. The effects can be easily adjusted and manipulated, providing creative flexibility that can elevate live performances.

The mixer also includes a cueing system that allows DJs to preview tracks through headphones before introducing them into the mix. This is complemented by a bright LED level meter for each channel, ensuring that audio levels are always visible and manageable.

Connectivity is another strong suit of the SMX.311. It offers multiple input options including phono and line-level inputs, making it compatible with various devices such as turntables, CD players, and media players. The master output includes both RCA and XLR connectors, providing flexibility for different sound systems.

Durability is key in the construction of the SMX.311. Built with robust materials, this mixer is designed to withstand the rigors of regular gigging and heavy use. The faders and knobs are designed for longevity, ensuring they maintain their responsiveness even after extensive handling.

In conclusion, the Stanton SMX.311 is a versatile and reliable DJ mixer that combines high-quality sound performance with a host of features designed to enhance the mixing experience. Its solid build, intuitive design, and professional-grade capabilities make it an excellent choice for any DJ looking to take their performances to the next level. Whether in a club or at a personal event, the SMX.311 stands out as a tool that can deliver exceptional audio experiences.
Top Page Image Contents