Rinse Aid Dispenser, Checking the dispenser

Rinse Aid Dispenser

Rinse aids prevent water from forming droplets that can dry as spots or streaks. They also improve drying by allowing water to drain off of the dishes during the final rinse by releasing a small amount of the rinse aid into the rinse water. Your dishwasher is designed to use a liquid rinse aid. Do not use a solid or bar-type rinse aid.

Checking the dispenser

Check the center of the fill indicator cap. Clear means it needs filling.

Or you can remove the fill indicator cap. If an “E” is visible, the dispenser is empty.

Dishwasher Efficiency Tips

Hot water dissolves and activates the dishwashing detergent. Hot water also dissolves grease on dishes and helps glasses dry spot-free. For best dishwashing results, water should be 120°F (49°C) as it enters the dishwasher. Loads may not wash as well if the water temperature is too low. Water that is too hot can make some soils harder to remove and cause certain detergent ingredients not to function. If your water heater is located far from the dishwasher, it may be necessary to run the hot water at the faucet closest to the dishwasher to minimize the amount of cold water in the water line.

To check water temperature

1.Run hot water at the faucet closest to your dishwasher for at least 1 minute.

2.Place a candy or meat thermometer in a glass measuring cup.

Filling the dispenser

The rinse aid dispenser holds 6 oz (175 mL) of rinse aid. Under normal conditions, this will last for about 3 months. You do not have to wait until the dispenser is empty to refill it. Try to keep it full, but be sure not to overfill it.

1.Make sure the dishwasher door is completely open.

2.Remove the fill indicator cap.

3.Add rinse aid. Fill to the smallest opening in the lower part of the dispenser. Overfilling can cause the rinse aid to leak out, and could cause oversudsing.

4.Clean up any spilled rinse aid with a damp cloth.

5.Replace the fill indicator cap. Close tightly.

3.Check the temperature on the thermometer as the water is running into the cup.

Additional efficiency tips

■To save water and energy and time, do not rinse dishes before putting them into the dishwasher.

■Use a low energy, quick, or short cycle whenever possible. These cycles use less hot water and energy than a normal cycle.

■Use a delay feature (on some models) to run your dishwasher during off-peak hours. Local utilities recommend avoiding heavy usage of energy at certain times of day.

■During the summer, run your dishwasher at night. This reduces daytime heat buildup in the kitchen.

■Use the energy-saving dry option whenever possible. Allow longer drying times (overnight) when using these options. Use a rinse aid to improve drying.

■Use cycles or options that add extra heat to the wash or rinse portion of the cycle only when needed.

■Run your dishwasher with full loads. Run a rinse cycle after meals until the dishwasher is full.

■If your home is equipped with a water softener, you may want to avoid starting the dishwasher during the regeneration of the softener, since this may contribute to poor wash performance.

TUD1000R specifications

The Whirlpool TUD1000R is a versatile and efficient undercounter refrigerator designed for convenience and style. This compact appliance is ideal for small kitchens, home offices, and entertainment areas, offering ample storage space in a sleek design. With a capacity of approximately 5.5 cubic feet, the TUD1000R is perfect for keeping beverages, snacks, and perishables within easy reach.

One of the standout features of the Whirlpool TUD1000R is its adjustable shelving. The shelves can be easily rearranged to accommodate various container sizes, allowing for flexible storage options. This adaptability is crucial for users who often shift between larger items like party platters and smaller snack containers. Additionally, the refrigerator includes a door bin to hold condiments and commonly used items, maximizing the use of vertical space.

Energy efficiency is another key characteristic of the Whirlpool TUD1000R. It is designed to consume minimal electricity while still providing reliable cooling performance. The unit is ENERGY STAR certified, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This feature not only helps in reducing energy bills but also makes it an environmentally friendly choice.

The TUD1000R utilizes a frost-free cooling system, which prevents ice buildup and ensures consistent temperatures throughout the refrigerator. This technology helps maintain the freshness of foods and beverages while eliminating the hassle of manual defrosting. The interior illumination features bright LED lights, making it easy to locate items, even in low-light conditions.

In terms of design, the Whirlpool TUD1000R boasts a modern aesthetic. Its stainless steel finish adds sophistication, making it a great fit for contemporary interiors. The reversible door option offers added flexibility for various kitchen layouts, ensuring seamless integration into any space.

With intuitive temperature controls, users can easily adjust the cooling settings to their preferences. The TUD1000R also comes equipped with a quiet operation mode, allowing it to run discreetly without disturbing household activities. Overall, the Whirlpool TUD1000R is a practical and stylish solution for those needing extra refrigeration space without compromising on appearance or efficiency.