Whirlpool SERIES 940 Using the rinse agent dispenser, To check dispenser, To fill dispenser

Using the rinse agent dispenser

Keep the rinse agent dispenser filled with a liquid rinse agent. A rlnse agent greatly Improves dish drylng by helplng water flow off them during the last rlnse. A rinse agent also keeps water from forming drop- lets and drying as spots or streaks.

A small amount of rinse agent automati- cally releases into the rinse water during the final rinse of each cycle. For best drylng results, check dispenser perlodlcally to see if It needs filling.

To check dispenser:

_ l

l

Check center of Fill Indicator Cap. Clear means it needs filling.

OR

Remove Fill Indicator Cap. An ‘E” is visible

when dispenser is empty.	Cap center clear	“E”vlslble
	when empty	when empty

To fill dispenser:

The rinse agent dispenser holds 6 ounces (175 mL). Under normal conditions, this lasts about 3 months.

1.Open dishwasher door completely.

2.Remove Fill Indicator Cap.

3.Add rinse agent. Fill to smallest opening in lower part of dispenser only. Overfilling may cause rinse agent to leak out. This

will not harm the dishwasher, but could	Do not fill past
cause oversudsing.	smallest openlng

4.Clean up any spilled rinse agent with a damp cloth.

5.Replace Fill Indicator Cap. Keep it closed tightly.

NOTE: You do not have to wait until the dispenser is empty before refilling, but do

not overfill it. Your dishwasher is designed to Keep dlspenser fllled for best drylng results use a liquid rinse agent. You do not need to

use a solid or bar-type rinse agent.

12