Before starting your dishwasher
1.Spin the Upper Spray Arm to make sure nothing will stop it from turning freely
2.Push door firmly when closing and it will automatically latch.
3.Run hot water at sink nearest dishwasher until it is hot. Turn it off.
II
A :,-
CLEAN SELECTOR BUllONS
Starting your dishwasher
POTS & PANS cycle...
1.Push POTS& PANSClean Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked POTS& PANS.
-POTS& PANSAND HEAVYWASHCycles share the same spot on the dial. The Clean Selector Button determines which cycle operates.
The dishwasher will automatically start that cycle.
NORMAL WASH cycle...
1.Push NORMAL WASH Clean Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked NORMAL WASH. The dish-
washer will automatically start that cycle.
HEAVY WASH cycle...
1.Push HEAVYWASHClean Selector Button.
2.Push button for option desired.
3.Turn Cycle Control Knob clockwise to dot marked HEAVYWASH.
-HEAVYWASHand POTS& PANSCycles share the same spot on the dial. The Clean Selector Button determines which cycle operates.
The dishwasher will automatically start that cycle.
LOW ENERGY WASH cycle...
1.Push NORMAL WASH Clean Selector Button.
2.Push butfor for option desired.
3.Turn Cycle Control Knob clockwise to dot marked LOWENERGYWASH.The dish-
washer will automatically start that cycle.
RINSE 81 HOLD cycle...
1.Select a Wash Cycle.
2.Select AIR DRYOption only.
3.Turn Cycle Control Knob clockwise to dot marked RINSE & HOLD. The dish-
washer will automatically start that cycle.
Changing a setting
You can change a setting anytime during any cycle.
1.Press in the door latch to unlatch the door and stop the cycle.
To add a dish after starting
1.To be sure the added item is washed and rinsed, make sure the Cycle Control Knob has not passed LOW ENERGY WASH.
2.Unlatch the doorto stop the cycle.
3.Open the door and add the dish.
2.Turn the Cycle Control Knob clockwise to the cycle you want.
3.Be sure the detergent dispensers are filled properly for the new cycle.
4.Close and latch the door. The dishwasher will
automatically start the new cycle.
4. Close the door. Do not latch It. Wait 30 sec- onds for air in the dishwasher to warm up. This helps reduce the amount of moisture that can come from the vent when restart- ing the cycle.
5.Latch the door. The dishwasher will start from where it stopped.
8