CD PLAYER FUNCTIONS
1
2
3
4
12
11
10
5 | 6 | 7 | 8 | 9 |
1.EJECT – Opens the CD door.
2.FADER START – You can use the crossfader to start and stop the CD decks. The fader start switch activates the fader start feature. When in the ON position, sliding the crossfader to either end will start the CD on that side and pause the CD on the other side and return to the cue point. Fader Start always starts from the cue point.
3.TIME – LCD display reads the time remaining or time elapsed, accord- ing to this button.
4.HEADPHONE INPUT – Insert either 1/8” or 1/4” plug for your head- phones here.
5.SGL/CTN – Switches between Single or Continuous play mode.
6.TRACK – Used to select the track to be played. The +10 button skips 10 tracks at a time.
7.CUE – Used to recall and preview cue points. A new cue point is set every time playback is resumed.
8.SEARCH – Scans forward or back through the current track. This unit features four scan speeds. Keep the or button held for a few sec- onds to scan faster. Tap the button for frame search.
9.PLAY/PAUSE – Plays or pauses the CD. A new cue point is set every time playback is resumed.
10.PITCH BEND – Used to momentarily speed up or down the track. The maximum pitch range is up to +/- 8% from pitch setting.
11.PITCH FADER – Used to speed up or slow down current track. The maximum pitch range is up to
12.LCD DISPLAY – Shows time (minutes, seconds, frame), and pitch information.
6