Whirlpool Drop-In Electric Range Installation Requirements, Tools and Parts

Page 3

INSTALLATION REQUIREMENTS

Tools and Parts

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

IMPORTANT: To avoid damage to your cabinets, check with your builder or cabinet supplier to make sure that the materials used will not discolor, delaminate or sustain other damage. This oven has been designed in accordance with the requirements of UL and CSA International and complies with the maximum allowable wood cabinet temperatures of 194°F (90°C).

Tools needed

Tape measure

Wrench or pliers

Level

Hand or electric drill

Phillips screwdriver

¹⁄₈" (3.2 mm) drill bit

Flat-blade screwdriver

Parts supplied

Check that all parts are included.

2 - #8 x ¹⁄₂" screws

Trim plate

2 - Oven racks

2 - #12 x 1⁵⁄₈" mounting screws (for mounting anti-tip bracket)

Anti-tip bracket (taped to oven rack)

Parts needed

A UL listed or CSA approved conduit connector

UL listed wire connects

Check local codes. Check existing electrical supply. See “Electrical Requirements” section.

It is recommended that all electrical connections should be made by a licensed, qualified electrical installer.

Location Requirements

IMPORTANT: Observe all governing codes and ordinances.

It is the installer’s responsibility to comply with installation clearances specified on the model/serial rating plate. The model/serial rating plate is located below the electronic control on oven frame.

The range should be located for convenient use in the kitchen.

To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5" (12.7 cm) beyond the bottom of the cabinets.

Cabinet opening dimensions that are shown must be used. Given dimensions are minimum clearances.

The floor anti-tip bracket must be installed. To install the anti- tip bracket shipped with the range, see “Install Anti-Tip Bracket” section.

Range support slats must be solid, level and flush with bottom of cabinet cutout. Floor must be able to support a weight of 225 lbs (102.0 kg). Support slats must be securely fastened to the floor.

Recessed installation area must provide complete enclosure around the recessed portion of the range.

Grounded electrical supply is required. See “Electrical Requirements” section.

Mobile Home - Additional Installation Requirements

The installation of this range must conform to the Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 (formerly the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD Part 280). When such standard is not applicable, the Standard for Manufactured Home Installations, ANSI A225.1/NFPA 501A or with local codes.

Mobile home installations require:

When this range is installed in a mobile home, it must be secured to the floor during transit. Any method of securing the range is adequate as long as it conforms to the standards listed above.

Four-wire cable must be used in a mobile home installation. The appliance wiring will need to be revised. See “Electrical Connection” section.

Product Dimensions

A

C

F

B*

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

E**

 

 

 

 

 

 

 

 

 

 

 

 

 

 

A. 30³⁄₄" (78 cm)

D. 29⁷⁄₈" (75.9 cm)

B. 27¹⁄₂" (69.9 cm) height to underside

E. 28⁵⁄₁₆" (71.9 cm) from

of cooktop edge with leveling legs

handle to standoff at back

screwed all the way in*

of range**

C. Model/serial number plate

F. 23³⁄₄" (60.3 cm)

(located below the electronic

countertop notch to rear

control on oven frame)

of cooktop

*Range can be raised approximately 1" (2.5 cm) by adjusting the leveling legs.

**When installed in a 24" (61.0 cm) base cabinet with

25" (63.5 cm) countertop; front of oven door protrudes 2¹⁄₂" (6.4 cm) beyond 24" (61.0 cm) base cabinet.

3

Image 3
Contents Installation Instructions DROP-IN Electric Range Your safety and the safety of others are very important Range SafetyInstallation Requirements Tools and PartsLocation Requirements Cabinet Dimensions Electrical RequirementsElectrical Connection Unpack Range Installation InstructionsInstall Anti-Tip Bracket Countertop PreparationAdjust Leveling Legs Electrical Connection Options ChartElectrical Connection Wire Cable from Home Power Supply Verify Anti-Tip Bracket LocationLevel Range If range does not operate, check the following Install Lower TrimComplete Installation Moving the Range

Drop-In Electric Range specifications

The Whirlpool Drop-In Electric Range is a versatile kitchen appliance designed to enhance cooking experiences and streamline meal preparation. This range combines style with functionality, making it a popular choice for modern kitchens. One of its standout features is the sleek, drop-in design that provides a seamless look, allowing it to blend seamlessly with countertops while providing the ease of access often preferred in contemporary cooking spaces.

One of the key characteristics of the Whirlpool Drop-In Electric Range is its cooking capacity. With multiple burners, including a powerful high-heat option for boiling and a simmer burner for delicate dishes, this range is designed to meet the needs of home cooks. The cooktop is equipped with smooth glass-ceramic surfaces, which not only add a touch of elegance but also ensure easy cleanup after cooking. The elements heat quickly and efficiently, allowing for faster meal preparation and consistent cooking results.

In terms of technology, the Whirlpool Drop-In Electric Range often includes features such as advanced electronic controls, which provide precise temperature settings and improve overall user experience. Some models feature Smart capabilities, enabling users to control the oven via smartphone apps. This connectivity allows users to preheat the oven, set timers, and receive notifications, adding convenience for those with busy lifestyles.

The oven itself is spacious, providing ample room for large dishes and multiple racks, making it suitable for baking multiple items at once. Many models come with convection cooking options, which circulate hot air for even baking and roasting, ensuring that dishes cook thoroughly. Additionally, some ranges include self-cleaning settings that make maintenance easier and keep the oven in pristine condition.

Safety features are also a priority in the Whirlpool Drop-In Electric Range. With options like a control lock for preventing unintended operation and indicator lights that notify when surfaces are hot, this appliance prioritizes user safety, making it an excellent choice for families.

Overall, the Whirlpool Drop-In Electric Range is a perfect blend of style, technology, and functionality, designed to elevate the cooking experience in any home. Its advanced features and beautiful design make it a standout choice for both aspiring chefs and casual home cooks alike.