Safety Instructions

1.Read Instructions － All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions － The safety and operating instructions should be retained for future reference.

3.Heed Warnings－All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions－All operating and use instructions should be followed.

5.Water and Moisture－The appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands－The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

7.Wall or Ceiling Mounting－The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation－The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat－The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources－The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization － Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

12.Power-Cord Protection－Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the cord in correspondence of

plugs, convenience receptacles, and the point where they exit from the appliance.

13.Cleaning - The appliance should be cleaned only as recommended by the manufacturer.

Clean by wiping with a cloth slightly damp with water. Avoid getting water inside the appliance.

14.Disconnect power cord before servicing.

15.Replace critical components only with factory parts or recommended equivalents.

16.For AC line powered units - Before returning repaired unit to user, use an ohm-meter to measure from both AC plug blades to all exposed metallic parts. The resistance should be more than 100,000 ohms.

17.Non-use Periods－The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

18.Object and Liquid Entry－Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

19.Damage Requiring Service－The appliance should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

20.Servicing－The user should not attempt any service to the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

21Ventilation – The appliance should be situated so that ist location or position does not interfere with its proper ventilation. For example, the appliance should not be siruated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

22Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

23Nonuse Periods – The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

S-500 specifications

The Stanton S-500 is a versatile DJ turntable designed to meet the demands of both professional and aspiring DJs. Renowned for its robust construction and quality performance, the S-500 stands out as a reliable piece of equipment in any DJ's arsenal. Its sleek, modern aesthetics make it an attractive addition to music setups.

One of the standout features of the Stanton S-500 is its direct-drive motor, which ensures high torque and rapid start-up times, allowing DJs to perform precise mixing and scratching techniques. This powerful motor minimizes the chance of slippage and maintains consistent speed, crucial for beatmatching tracks seamlessly. The S-500 also boasts an adjustable pitch control feature, enabling DJs to alter the tempo of the music up to +/- 8%, facilitating creative mixing options.

Another significant characteristic is the S-500's heavy-duty construction, which contributes to its durability and stability during performances. The solid chassis is designed to absorb vibrations and reduce unwanted noise, ensuring that sound quality remains pristine even in the most demanding environments. Additionally, the turntable is equipped with a high-quality removable cartridge and stylus, allowing for easy upgrades and replacements.

Technologically, the Stanton S-500 incorporates an anti-skate adjustment mechanism, which enhances tracking accuracy and minimizes distortion, especially during intense scratching and back-cueing. This feature is essential for DJs who venture into complex mixing techniques, as it helps maintain sound integrity.

Ease of use is another hallmark of the S-500. The intuitive controls and clearly labeled buttons make it accessible for both beginners and experienced users. The turntable also features RCA output connections, enabling straightforward integration with mixers and sound systems.

In summary, the Stanton S-500 turntable is an exemplary choice for DJs seeking reliability, quality, and functionality. With its direct-drive motor, adjustable pitch control, robust construction, and thoughtful technology, the S-500 offers a complete package for anyone serious about the art of DJing. Whether in a club setting or a personal studio, this turntable is poised to deliver exceptional performance and creativity.