Whirlpool N/A instruction manual Electronic Display, Selecting and changing the clock time

GB

GUIDE TO USING THE ELECTRONIC PROGRAMMER

Electronic

Display

Operating the oven using the electronic programmer

programmer

Selecting the cooking time:

Select the cooking time (available with any function) to turn the oven on for a specified period of

time. At the end of the specified time the oven will switch off automatically. The maximum

Heat

programmed cooking time is 3 hours and 59 minutes.

Temperature

Maintenance

1.

Set the function and temperature or grill level (see chapter: “Fast starting the oven” and

“Selecting the cooking function”).

increase

Extra

indicators

browning

2.

Repeatedly press the button , the indicator

blinks on the display and “-0:00”appears.

￿

!

￿ ON/OFF - Function Selector Knob

3. Turn knob ! clockwise: the selected time blinks on the display. The appearance of the dash

Button to select and confirm

“-”indicates that the chosen time decreases until “0” is reached.

programmes

! Knob to change preprogrammed values

Cooking time End of

Clock

(temperature, time, levels)

cooking time

4.

The oven automatically starts cooking 20 seconds after the setting and the time remaining until

Fast starting the oven

the end of cooking appears on the display.

Note: To view or change the previously set temperature, turn the knob !by one click. To return

When the oven is connected to the power supply for the first time, or reconnected after a power

to the display of the remaining time, wait 20 seconds or press the button .

failure, the display indicates “

”.

To use the special functions Extra browning

and Heat Maintenance

, consult the chapter

To switch on the oven:

1.

Turn knob ￿￿to “0”.

“Special functions”.

2.

press the ￿button. The display shows “--:--”.

To change the pre-set temperature or grill level:

Selecting and changing the clock time:

Turn the knob ! and confirm by pressing the button

or wait about 10 seconds for automatic

1.

Press the button

three times.

acceptance of the setting.

2.	Turn the knob	within 15 seconds to set the time of day. The time of day flashes on the display.
3.	Press the button	or wait 15 seconds to get automatic confirmation of the setting.

To modify the time of the day:

Press the button	twice	blinks on the display. Repeat the steps described above.
Select cooking function:

1.Turn knob ￿ to the chosen function: the preset temperature or grill level will flash on the display.

2. If this value is right, press the button	to confirm or wait 10 seconds to have the setting
accepted automatically.

To change the pre-set temperature or grill level:

1.Turn knob !: the temperature (or grill level when knob ￿ is on the selection ) blinks on the display.

2. Press button	to confirm or else wait about 10 seconds to have the setting accepted
automatically.

The oven begins operation about 5 seconds after confirmation: the temperature increase indicators on the display turn on sequentially, indicating the temperature increase on the graduated scale °C .

Notes:

The set values can be changed even during cooking.

At the end of cooking:

Switch off the oven by turning knob ￿ back to “0”. The time of day appears again on the display.

Important notes:

To cancel any selection made, turn knob ￿ to “0”.

Keeping button	down for 5 seconds deactivates the audio signal associated with the manipulation of knobs and buttons.
Press button	again for 5 seconds to reactivate. For safety reasons, the oven switches off automatically (except for the

“ ” and functions) after 4.5 hours of continuous operation.

Appearance of on the display:

When the pre-set time (end of cooking) runs out, appears on the display and an acoustic signal sounds for 15 minutes in intervals. The oven switches off automatically and the oven's interior lamp stay on for 25 min.

1. Press button to stop the acoustic signal.

2.Turn knob ￿ back to “0”. The lamp turns off. The time of day appears again on the display.