Solid State Logic 82S6XL020E Configuring the XLogic Mic Amp, Setting the Channel Displays

Page 17

Configuration

3.6Configuring the XLogic Mic Amp

There are a number of internal link settings, most of which should not normally require adjustment – see Appendix A for a full listing. Those links that change the operation of the unit are described below.

Setting the Channel Displays

If the unit is connected to an XL 9000 console the 5 address bits on the 25 way ‘D’ type Audio/Control connector are set on the console channel bus card so that the channel displays automatically show the channels the unit is connected to.

When controlled locally or from the XLogic Mic Amp Remote control unit, the channel displays can be set by adjusting a rotary switch that is accessible through the lid of the case – see the drawing to the right. The rotary switch has 16 positions, allowing the front panel display to show channel numbers in the range 1 to 60. To display channel numbers above 60 the internal jumper LK5 (screened BIT 5) should be moved to position ‘b’.

To perform this adjustment, make a note of the front panel displays, power-down the unit and insert a thin flat bladed screwdriver. Referring to both the screening on the top cover and to Table 1. opposite, set the switch as required. Remove the screwdriver and re-apply power.

25-28/85-88

21-24/81-8429-32/89-92

17-20/77-8033-36/93-96

13-16/73-7637-40

9-12/69-72 41-44

5-8/65-6845-48

1-4/61-6449-52

053-56

57-60

Note that the rotary switch position is ignored if the unit is connected to an XL 9000 console but that LK5 will always increase the displayed number by 60 when set to position ‘b’.

Note. It is recommended that this adjustment is not performed with power applied as a mis-placed screwdriver can cause damage to the XLogic Mic Amp!

Changing the Remote +48V and Phase Switch Functions

If the unit is to be controlled from an XLogic Mic Amp Remote control unit then the phantom power selection is normally made from the Mic Amp front panel and phase is remote controlled. If the unit is to be controlled from an XL 9000 then phase is normally controlled from the Mic Amp front panel and phantom power is controlled from the console. This selection is automatic – the unit detects if any of the address inputs on the Audio/Control 25 way ‘D’ type connector are connected to ground and selects ‘XL’ mode accordingly. The selection can be reversed by moving the internal jumper LK6 (screened PHAS/PHAN) to position ‘b’.

Page 13

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Super Analogue Mic Amp Page Solid State Logic Solid State Logic Contents XLogic Mic Amp Remote rear XLogic Mic Amp Remote frontXLogic Mic Amp front XLogic Mic Amp rearWarranty Repairs WarrantyOut of Warranty Repairs IntroductionElectrical Safety Warning Safety considerationsInstallation DefinitionsMains Isolation and Over-Current Protection Mains Supply and PhasesCE Certification FCC CertificationMains Input Module Voltage Selection InstallationMounting Standalone Operation1VIDEO 2VIDEO Console Wiring DiagramConnection to XL 9000 Consoles Solid LogicState Remote Control Wiring DiagramConnection to XLogic Mic Amp Remote LK5 Channel Display Setting Normal OperationChanging the Remote +48V and Phase Switch Functions Configuring the XLogic Mic AmpSetting the Channel Displays Stereo Jack Talkback Input Each channel has two outputs one on OperationChannel Displays Test Mode Appendix a Internal links and fuses Test ModeFuses Mains Inlet Internal FusesMic Input Appendix B Connector PinoutsChannel Outputs 1 Audio/ControlMonitor In / Monitor Out Headphone OutputRemote 1 Remote 3XL 9000 DL to 25way ‘D’ Wiring Channels 1-8 / 25-32 / 49-56 XL 9000 DL to 25way ‘D’ Wiring Channels 9-16 / 33-40 / 57-64 Appendix B Connector Pinouts Channel Address Bit Linking Appendix C Performance Specification Headroom THD + NoiseCrosstalk Cmrr Trim Appendix D Calibration InformationMicrophone Input Appendix F Environmental Specifcation Appendix E Physical Specification

82S6XL020E specifications

The Solid State Logic 82S6XL020E is a cutting-edge analog mixing console that has garnered attention for its impressive array of features and advanced technology. Known for its versatility and superb audio quality, this console is designed to cater to both live sound applications and studio recording environments. Equipped with a host of functionalities, the 82S6XL020E is a go-to choice for audio professionals seeking reliability and performance.

One of the standout features of the 82S6XL020E is its robust channel strip design. Each channel boasts SSL’s renowned SuperAnalogue™ technology, which ensures pristine sound quality and exceptional dynamic range. The input stage is optimized for minimal distortion, enabling the console to handle diverse audio sources effortlessly. The console also includes high-quality preamps, allowing for transparent gain with the character needed for professional applications.

The 82S6XL020E incorporates a flexible routing system that allows engineers to tailor their mixes with ease. With multiple auxiliary sends, direct outputs, and a comprehensive monitoring section, users can effortlessly manage signal flow. The built-in effects processing further enhances its utility, featuring a range of algorithms that provide professional-grade sound enhancement and manipulation.

In terms of user experience, the 82S6XL020E has been designed with an intuitive interface. The layout is streamlined, ensuring that engineers can quickly adjust settings without hindrance during critical live performances or recording sessions. The large faders and clearly labeled controls contribute to a workflow that is both efficient and user-friendly, even under the pressure of tight deadlines.

Additionally, the console supports advanced digital integration through options such as SSL’s own remote control software, allowing for MIDI compatibility and seamless communication with external devices. This level of connectivity extends its usability in modern studio environments where digital workflows are prevalent.

Durability is another key characteristic of the 82S6XL020E. Solid State Logic has built this console with high-quality components designed to withstand the rigors of frequent use, making it a reliable partner for both studio and live settings.

In summary, the Solid State Logic 82S6XL020E is a versatile analog mixing console that combines exceptional sound quality, flexible routing options, and user-friendly features. Its integration of advanced technologies makes it an indispensable tool for audio professionals aiming to achieve the highest standards in sound reproduction and mixing.
Top Page Image Contents