Whirlpool 8303647A Electrical Requirements, Prepare Built-In Oven, Electrical Connection

Page 5

Electrical Requirements

If codes permit and a separate ground wire is used, it is recommended that a qualified electrical installer determine that the ground path and wire gauge are in accordance with local codes.

Check with a qualified electrical installer if you are not sure the oven is properly grounded.

This oven must be connected to a grounded metal, permanent wiring system.

Be sure that the electrical connection and wire size are adequate and in conformance with the National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local codes and ordinances.

A copy of the above code standards can be obtained from:

National Fire Protection Association

One Batterymarch Park

Quincy, MA 02269

CSA International

8501 East Pleasant Valley Road

Cleveland, OH 44131-5575

Electrical Connection

To properly install your oven, you must determine the type of electrical connection you will be using and follow the instructions provided for it here.

■Oven must be connected to the proper electrical voltage and frequency as specified on the model/serial number rating plate. The model/serial number rating plate is located at the bottom of the right-hand mounting rail. See the following illustration.

A

A

Single Oven

Double Oven

A. Model/serial number plate

A. Model/serial number plate

■Models rated from 7.3 to 9.6 kW at 240 volts (5.5 to 7.2 kW at 208 volts) require a separate 40-amp circuit. Models rated at 7.2 kW and below at 240 volts (5.4 kW and below at 208 volts) require a separate 30-amp circuit.

■A time-delay fuse or circuit breaker is recommended.

■Connect directly to the fused disconnect (or circuit breaker box) through flexible, armored or nonmetallic sheathed, copper cable (with grounding wire). See “Make Electrical Connection” section.

■Flexible cable from the oven should be connected directly to the junction box.

■Fuse both sides of the line.

■Do not cut the conduit. The length of conduit provided is for serviceability of the oven.

■A UL listed or CSA approved conduit connector must be provided.

■If the house has aluminum wiring follow the procedure below:

1.Connect a section of solid copper wire to the pigtail leads.

2.Connect the aluminum wiring to the added section of copper wire using special connectors and/or tools designed and UL listed for joining copper to aluminum.

Follow the electrical connector manufacturer's recommended procedure. Aluminum/copper connection must conform with local codes and industry accepted wiring practices.

INSTALLATION INSTRUCTIONS

Prepare Built-In Oven

1.Decide on the final location for the oven. Locate existing wiring to avoid drilling into or severing wiring during installation.

WARNING

Excessive Weight Hazard

Use two or more people to move and install oven. Failure to do so can result in back or other injury.

2.To avoid floor damage, set the oven onto cardboard prior to installation. Do not use handle or any portion of the front frame or trim for lifting.

On models with shipping feet attached:

To avoid product damage, do not remove the shipping feet at the front lower corners of the oven. The shipping feet will protect the lower oven trim until the oven is inserted into cabinet.

3.Remove the shipping materials and tape from the oven.

4.Remove the hardware package from inside the bag containing literature.

5.Remove and set aside racks and other parts from inside the oven.

6.Move oven and cardboard close to the oven’s final location.

7.Open the oven door.

8.Locate the oven door latches in both corners of the oven door, and rotate the latches forward to the unlocked position.

A

B

A. Oven door latch in locked

B. Oven door latch in unlocked

position

position

IMPORTANT: Use both hands to remove oven doors.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Table of Contents / Table des matières Your safety and the safety of others are very important BUILT-IN Oven SafetyLocation Requirements Installation RequirementsTools and Parts Cabinet Dimensions Double Oven Product Dimensions Double OvenSingle Oven Installed in Cabinet Double Oven Installed in CabinetElectrical Connection Electrical RequirementsPrepare Built-In Oven Wire Cable from Home Power Supply Electrical Connection Options ChartDisconnect power Make Electrical ConnectionWire Cable from Home Power Supply U.S. Only Install OvenIf you need Assistance or Service Complete InstallationCheck Operation of Single Oven Check Operation of Double OvenVotre sécurité et celle des autres est très importante Sécurité DU Four EncastréOutillage et pièces Exigences DinstallationExigences demplacement Dimensions du placard Four double Dimensions du produit Four doubleFour simple installé dans un placard Four double installé dans un placardSpécifications électriques Instructions DinstallationPréparation du four encastré Raccordement électriqueRaccordement électrique Câblage de la maison Voir la section Tableau des options de raccordement électriqueInstallation du four Si vous avez besoin dassistance ou de service Achever linstallationVérification du fonctionnement du four simple Vérification du fonctionnement du four double

8303647A specifications

The Whirlpool 8303647A is a highly-regarded appliance in the realm of home kitchen technology, specifically designed for those who seek efficiency, convenience, and performance. This model is distinguished by its key features and innovative technologies that cater to modern cooking needs.

One of the standout aspects of the Whirlpool 8303647A is its substantial cooking capacity. With spacious oven dimensions, it allows for the preparation of meals for large families or gatherings. This model incorporates multiple rack positions, enabling home chefs to optimize the use of space and cook multiple dishes simultaneously.

The Whirlpool 8303647A comes equipped with advanced cooking technologies. The AccuBake system is designed to ensure consistent cooking results by utilizing a sensor to monitor the oven's temperature. This feature helps in maintaining an even cooking environment, allowing users to achieve perfect baking and roasting outcomes every time.

Moreover, this model offers a self-cleaning function, which simplifies maintenance and keeps the interior of the oven looking pristine. Users can select between different cleaning cycles, making it easy to remove stubborn food residues and grease without considerable effort.

An additional highlight is the range of cooking modes available, including convection baking, broiling, and traditional baking. The convection mode utilizes a fan to circulate hot air, which reduces cooking time while enhancing food texture. This flexibility allows users to experiment with a variety of dishes and satisfies diverse culinary preferences.

The Whirlpool 8303647A also features a user-friendly control panel, intuitive knobs, and digital displays that make it simple to navigate various settings and functions. The oven is built with durable materials that ensure longevity and reliability, making it a worthwhile investment for any kitchen.

In terms of energy efficiency, this model is designed to minimize energy consumption while delivering powerful performance, resulting in lower utility bills. The Whirlpool 8303647A not only meets the demands of modern cooking but also aligns with eco-friendly principles.

Overall, the Whirlpool 8303647A is a well-rounded kitchen appliance that offers remarkable features and cutting-edge technologies. Whether baking a cake, roasting a chicken, or conducting meal prep, this oven stands out as an essential tool for cooking enthusiasts and busy families alike. Its blend of functionality, ease of use, and durable design makes it a top choice for anyone looking to enhance their culinary experience at home.
Top Page Image Contents