Whirlpool 4VED29DQ, 4VED27DQ Changing the control, Settings, Adjusting the refrigerator shelves

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

settings

l Adjust the Refrigerator Control first.

*Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

CONDITION:		REASON:
If Refrigerator		Door	opened			often
Section	is	Large	amount			of food added
TOO WARM		Room	temperature				too warm
If Freezer		Door	opened			often
Section is		Large	amount			of food added
TOO WARM		Very	cold		room temperature
		(can’t	cycle often				enough)
If Refrigerator		Controls			not	set correctly
Section is		for your		conditions
TOO COLD
If ICE	isn’t	Heavy		ice usage
MADE	FAST	Very	cold		room temperature
ENOUGH		(can’t	cycle often				enough)
If BOTH		Door	opened			often
SECTIONS		Large	amount			of food added
are TOO WARM		Very warm or very cold room
		temperatures

RECOMMENDED CONTROL SElTlNGS:

Refrigerator4

FreezerA

Refrigerator

FreezerE

Refrigerator2

FreezerB

Refrigerator

Freezer

Refrigerator4

FreezerB

Adjusting the refrigerator shelves

Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass shelves:

1.Remove items from shelf.

2.Slide shelf out with an even, constant pull.

3.Lift front and slide the rest of the way out.

To move shelf guides to a new position:

1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.

2.To replace guide, push guide onto rear support. Push front of guide down onto support.

To replace glass shelves:

1.Guide rear of shelf into shelf guide.

2.Slide shelf into place.

Be careful when handllng glass items.

8