Whirlpool 4ED27DQ Changing the control, Settings, Removing the door shelf fronts, Condition

Changing the control

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

settings

9 Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments.

. Then adjust the Freezer Control if needed.

CONDITION:		REASON:
Refrigerator		l	Door	opened			often
section		l	Large	amount			of food added
too	warm	l	Room	temperature				too warm
Freezer		l	Door	opened			often
section		l	Large	amount			of food added
too	warm	l Very cold room temperature
			(can’t	cycle		often		enough)
Refrigerator		l	Controls		not	set correctly
section			for your		conditions
too	cold
Ice	not	l	Heavy		ice usage
made fast		l Very cold room temperature
enough			(can’t	cycle		often		enough)
Both		l	Door	opened			often
sections		l	Large	amount			of food added
too	warm	l Very warm or very cold room
			temperatures

RECOMMENDED CONTROL SETTINGS:

Refrigerator 4

FreezerA

Refrigerator 3

FreezerC

Refrigerator 2

FreezerB

Refrigerator 3

FreezerC

Refrigerator 4

FreezerB

Removing the door shelf fronts

Remove the door shelf fronts for easier cleaning.

To remove shelf fronts:

1.Remove all items from the shelf.

2.Pull out on the inside tab at each end of the shelf front.

3.Pull shelf front straight out.

To replace shelf fronts:

1.Line up each end of the shelf front with the button on the door liner wall.

2.Push shelf front straight back until it snaps securely into place.

3.Replace items on the shelf.

9