Whirlpool 4ET18ZK If You Need Assistance, Before calling for assistance, Problem, Possible Cause

Page 17

If You Need Assistance

Or Service

This section is designed to help you save the cost of a service call. First we outline possible problems, their causes and their solutions. However, you may still need assistance or service. When calling an authorized Whirpool service company for help or calling for service, you will need to provide a complete description of the problem, your appliance’s complete model and serial numbers and the purchase date. (See page 2.) This information is needed to respond to your request properly.

1. Before calling for assistance . . .

Performance problems often result from little things you can find and fix without tools of any kind. Please check the chart below for problems you can fix. It could save you the cost of a service call.

PROBLEM

Your refrigerator will not operate

Unfamiliar sounds or a rattling/jingling noise

There is water in the defrost pan

The lights do not work

POSSIBLE CAUSE

The power supply cord is not plugged into a live circuit with proper voltage.

A household fuse has blown or circuit breaker tripped.

The Refrigerator Control is not set correctly.

There is something on top of or behind the refrigerator.

The sounds are normal.

This is normal in hot, muggy weather. The pan may even be half full.

A household fuse has blown or circuit breaker tripped.

The power supply cord is not plugged into a live circuit with proper voltage.

The bulb is burned out.

SOLUTION

Firmly plug power cord into a live circuit with proper voltage. (See page 5.)

Replace household fuse or reset circuit breaker.

Set Refrigerator Control to a numbered setting. (See page 7.)

Remove item from on top of or behind the refrigerator.

New features on your new refrigerator make new sounds. (See “Understanding the sounds you may hear” on page 12.)

Make sure the refrigerator is level so the pan does not overflow.

Replace household fuse or reset circuit breaker.

Firmly plug power cord into a live circuit with proper voltage. (See page 5.)

Replace bulb. (See page 11.)

The motor seems to run too much

The condenser coils are dirty. It is hot outside or in the room.

Thedoorhasbeenopened frequently.

A large amount of food has been put in at one time.

Clean the coils (See page 14.)

On hot days, or if the room is too warm, the motor naturally runs longer.

Open the door as few times as possible.

The motor will run longer in order to cool down the interior when food is added.

17

Image 17
Contents UseAndCare Thank you for buying a Whirlpool appliance Your safety is important to usHelp when you need it Help us help you Important Safety InstructionsParts And Features Cleaning it Before Using Your RefrigeratorInstalling it properly Plugging itLeveling it Setting the controls Using Your RefrigeratorTemperature controls This SectionChanging the control SettingsAdjusting the refrigerator shelves Adjusting the shelf glideRemoving the meat Drawer and coverRemoving the crispers Using the ice cube traysCrisper cover Removing the freezer shelfRemoving the base grille Changing the light bulbsSaving energy Reversing the door swingUnderstanding the sounds you may hear HOW to Clean Cleaning your refrigeratorCaring For Your Refrigerator Part What to USELong holidays Holiday and moving careShort holidays MovingStoring fresh food Power interruptionsGuide Storing frozen food Solution ProblemIf You Need Assistance Before calling for assistanceIf you need FSP* replace- ment parts If the problem is not due to One of the items listed StepRefrigerator Warranty