Whirlpool 4ED25DQ Csntm%, Settings, Adjusting the refrigerator shelves

the csntm%

If you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide.

-- ---. ----------

settings

l Adjust the Refrigerator Control first.

l Wait at least 24 hours between adjustments. l Then adjust the Freezer Control if needed.

r-	CONDITION:	REASON:
	If Refrigerator	Door	opened	often
	Section is	Large	amount	of food added
	TOO WARM	Room	temperature		too warm
	If Freezer	Door	opened	often
	Section is	Large	amount	of food added
	TOO WARM	Very	cold room temperature
		(can’t	cycle often		enough)

RECOMMENDED CONTROL SETrINGS:

Refrigerator 4

FreezerA

Refrigerator 3

FreezerC

If Refrigerator		Controls		not		set correctly
Section is		for your		conditions
TOO COLD
If ICE	isn’t	Heavy	ice		usage
MADE	FAST	Very cold			room temperature
ENOUGH		(can’t	cycle			often enough)
If BOTH		Door	opened			often
SECTIONS		Large	amount of food added
are TOO WARM		Very warm or very cold room
		temperatures

Refrigerator 2

FreezerB

Refrigerator

FreezerE

Refrigerator 4

FreezerB

Adjusting the refrigerator shelves

Shelves can be adjusted to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk and other heavy food items.

To remove glass shelves:

1.Remove items from shelf.

2.Slide shelf out with an even, constant pull.

3.Lift front and slide the rest of the way out.

To move shelf guides to a new position:

1.Lift front of guide. Pull guide forward off rear support. Repeat for other guide.

2.To replace guide, push guide onto rear support. Push front of guide down onto support.

To replace glass shelves:

1.Guide rear of shelf into shelf guide.

2.Slide shelf into place.

Be careful when handling glass items.

a