Solid State Logic 82S6XR0A0B owner manual Performance Specification, Measurement Conditions, A-3

Page 5

X-Rack Mic Amp Module

A.3 Performance Specification

The following pages contain audio performance specification figures for the X-Rack Mic Amp module. No other Solid State Logic products are covered by this document and the performance of other Solid State Logic products can not be inferred from the data contained herein.

A.3.1 Measurement Conditions

For each set of figures on the following pages, the specific unit and test setup will be stated at the beginning of that section. Any changes to the specified setup for any particular figure(s) will be detailed beside the figures to which that difference applies.

A.3.2 Measurement References

Unless otherwise specified the references used in this specification are as follows:

•

Reference frequency:

1kHz

•

Reference level:

0dBu, where 0dBu ≈ 0.775V into any load

• Source impedance of Test Set:

50Ω

• Input impedance of Test Set:

100kΩ

•All unweighted measurements are specified as 22Hz to 22kHz band limited RMS and are expressed in units of dBu

•All distortion measurements are specified with a 36dB/Octave low pass filter at 80kHz and are expressed as a percentage

•The onset of clipping (for headroom measurements) should be taken as 1% THD

•Unless otherwise quoted all figures have a tolerance of ±0.5dB or 5%

•All measurements are made with the operating level switch set for +4dBu

A.3.3 Microphone Amplifier Performance

Signal applied to Microphone Input and measured at Output. Pad switched out and Input Gain control set to +12dB (minimum).

Gain

Continously variable from +12dB to +75dB

 

Independently switchable 20dB Pad available

Input Impedance

Continously variable from ≈1k2Ω to ≈10kΩ

Output Headroom

> +26dBu at onset of clipping

THD + Noise

< 0.003% at 1kHz

(-18dBu applied, +28dB gain)

< 0.006% at 10kHz

Frequency Response

+0.05dB/-0.1dB from 20Hz to 20kHz

 

–3dB at 150kHz

Equivalent Input Noise

< –127dB at maximum gain

(input terminated with 150Ω)

< –90dB at 0dB gain (+20dB with Pad ‘IN’)

Common Mode Rejection

> 75dB from 50Hz to 1kHz

(-10dBu applied, +30dB gain)

> 70dB at 10kHz

Page A-3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Solid State Logic Page Operation ConnectionRack Mic Amp Module A-1A-2 3 HF/LF Section GOutput Section H Measurement Conditions Performance SpecificationMeasurement References Microphone Amplifier PerformanceA-4 Instrument Input PerformanceLine Input Performance A-5 Calibration InformationPhysical Specification Connector DetailsEnvironmental Specification A-6

82S6XR0A0B specifications

The Solid State Logic 82S6XR0A0B is a renowned audio console that embodies cutting-edge technology and exceptional sound quality, making it a preferred choice for professional recording studios, live sound applications, and broadcast facilities. This console exemplifies the longstanding legacy of SSL in delivering high-performance audio equipment that meets the demands of discerning audio professionals.

One of the standout features of the 82S6XR0A0B is its modular design, which allows for enhanced flexibility and customization. Users can easily configure the console to fit specific needs, whether it be for music production, film scoring, or live event management. The console offers a comprehensive range of input options, including analog, digital, and MADI, ensuring compatibility with various audio sources and formats.

The SSL 82S6XR0A0B incorporates advanced analog signal processing technologies combined with the latest digital innovations. The console features high-quality mic preamps, renowned for their clarity and low noise, which provide exceptional detail in recordings. The equalization capabilities are also impressive, with fully parametric EQ for sculpting sound with precision. The integration of dynamics processing, including compressors and gates, facilitates refined signal control across multiple channels.

A key characteristic of the 82S6XR0A0B is its user-friendly interface. The layout is designed with ease of use in mind, ensuring that audio engineers can navigate through the console efficiently without being overwhelmed by complexity. The color-coded faders, intuitive touchscreen controls, and comprehensive monitoring options make mixing sessions more streamlined.

Another significant aspect of the 82S6XR0A0B is its ability to integrate seamlessly with digital workflows. With a robust protocol support, including Ethernet and MIDI, the console is well-suited for modern production environments that rely on complex digital setups. This allows for remote control capabilities and enhanced collaboration in hybrid workflows.

Overall, the Solid State Logic 82S6XR0A0B is a powerful audio console that marries traditional analog warmth with advanced digital features. Its versatility, sound quality, and intuitive design make it an indispensable tool for audio professionals seeking to elevate their productions, whether in the studio or on stage. With a legacy of excellence, SSL continues to set the standard for professional audio solutions.
Top Page Image Contents