LCD Display

starting point of a seamless loop. Press OUT to set the ending point of a loop, and the loop will continue to play until the OUT button is pressed again. If a seamless loop has been made, but the CD player is not actively in loop mode (not playing), pressing the RELOOP button will instantly reactive the loop. Press OUT to exit the loop. LOOP and RELOOP will appear in the LCD display when the reloop function is available. During play mode, pressing the RELOOP button will instantly return play to the last set point without interrupting playback.

13.BANK BUTTONS – Four different cue points or samples can be saved to these buttons. See operating instructions for further explanation.

14.CLEAR BUTTON – Clears cue points stored in the BANKS (please refer to item #22).

15.LOOP SAVE BUTTON – After creating a loop point (#21), pressing this button allows you to store the loop to one of the four BANKS. While the SAVE button is flashing red, press one of the BANK buttons to store the loop in that location. Cue points can also be saved by following this procedure. BANK locations can also be overwritten in the same way.

16.PLAY/PAUSE BUTTON – Press to play the CD from the current location, or to pause it at the current location.

17.CUE BUTTON – During normal playback, pressing the button immediately returns the track to the last set cue point and pauses playback when released. Pressing CUE again will engage the cue monitor, which plays the track from the cue point until you release the CUE button. If you press pause (#25) at any time other than the currently stored cue point, pressing CUE will reset the cue point to the new position.

18.SEARCH BUTTONS – Allows you to search through a track or a CD in either direction. While in pause mode, tracks can be moved one frame at a time. Holding down one of these buttons will cause the search in that direction to occur at a faster rate.

19.TRACK BUTTONS – Tapping one of these buttons will skip to the previous or next track. Holding it down will rapidly skip through the tracks.

20.OPEN/CLOSE BUTTON – Opens or closes the CD tray. The CD will only eject while in pause or cue mode, and will not work while a CD is playing. If the tray is left open, it will close automatically after a brief time.

21.SAMPLER MODE – Press the MODE button to switch between ONE SHOT or LOOP mode. ONE SHOT will play the samples once, then end. LOOP MODE will continue to play the sample over and over.

22.AUDIO OUT – This analog output signal requires a pair of RCA cables (left and right) to be connected to a line or aux input.

23.DIGITAL OUT – This digital output signal requires one SP/DIF cable to be connected to a SP/DIF input on your mixer or computer.

24.FADER START / RELAY – This connection allows two CD players to be linked for relay play. This can also be connected to a mixing board that supports automatic fader start.

25.VENT SLITS – These openings are used for the proper ventilation of the unit. In order to prevent overheating and to insure proper operation, do not cover or block these slits.

26.POWER BUTTON – Turns the unit on and off.

27.AC IN – Plug in the power supply cable here. The plug can only be inserted in one direction, so do not force it in.

28.TRACK – Indicates the current track selected or being played.

29.WHEEL INDICATOR – This is a visual representation of a vinyl marker, which is traditionally used to mark the location of a certain sound or cue point on a vinyl record. Here, it indicates the play position, rotates during playback in either direction, and stops during cue or pause mode. It also indicates the speed of the forward and reverse search operation.

30.PLAY – Indicates when the unit is currently playing a CD.

31.PAUSE – Indicates the unit is in CUE or PAUSE mode.

32.CUE – Indicates the unit is at a cue point and is ready to play.

33.ANTI SHOCK AND BUFFER INDICATOR – Indicates the current status of the buffer memory. This is represented on the display by a buck- et being filled or emptied. The bucket itself represents the instant start function (which works by buffer memory). If the bucket is flashing, the instant start is not available. Each bar within the bucket represents 2 seconds of anti shock protection. There is up to 10 seconds of anti

shock protection available.

34.AUTO INDICATOR – Indicates when Auto Cue mode is active.

35.PITCH VALUE – Shows the percentage of the pitch slider.

36.PITCH – Indicates when the pitch percentage is displayed.

37.TIME BAR – Shows a proportionate visual representation of the time remaining or time elapsed.

38.TIME DISPLAY – Displays the time of track(s) currently selected in increments of Minutes, Seconds, and Frames.

C.303 specifications

The Stanton C.303 is a noteworthy advancement in the field of audio technology, particularly in high-fidelity music reproduction. As a versatile turntable, the C.303 embodies a meticulous design philosophy aimed at audio enthusiasts and professionals alike. Aimed at delivering superior sound quality, it showcases a combination of precision engineering and innovative technologies.

One of the standout features of the Stanton C.303 is its robust chassis, constructed from high-density materials that effectively minimize resonance and vibrations. This rigid structure ensures that sound reproduction remains clean and accurate, allowing music lovers to experience their favorite records without interference from unwanted noise.

The C.303 is equipped with a premium-quality tonearm, designed for optimal tracking and stability. This precision-engineered component facilitates seamless movement across the vinyl surface, allowing for accurate playback of even the most intricate grooves on a record. The tonearm’s adjustable counterweight and anti-skate mechanism further enhance its performance by minimizing distortion and maintaining alignment, even during dynamic passages of music.

In terms of technology, the Stanton C.303 incorporates a highly efficient DC motor, which provides consistent and stable speed control. This feature is essential for ensuring that the playback remains true to the original recording, avoiding the pitch variations that can occur with less reliable systems. The turntable also supports both 33 1/3 and 45 RPM speeds, catering to a wide range of vinyl records.

Another key characteristic of the C.303 is its user-friendly interface, complete with intuitive controls that allow for easy operation. Whether adjusting the speed, cueing tracks, or switching between playback modes, users can enjoy a hassle-free experience. Additionally, the stylish design, highlighted by a sleek finish, makes the C.303 an attractive addition to any audio setup.

Overall, the Stanton C.303 combines high-quality materials, advanced engineering, and thoughtful design, making it a standout choice in the world of turntables. Whether for casual listeners or dedicated audiophiles, the C.303 promises an exceptional audio experience that enhances the enjoyment of vinyl records, bridging the gap between analogue charm and modern precision.